Hi
So i took a look at logs as i usually do, daily, and saw that my firewall was in panic mode (or so it seems)
Looking at the yum update logs i saw the following:
running systemctl --failed shows the following:
although, all my iptable rules are up and running, checking the output of firewall debug
no idea whats up, the firewall seems to be running, but logs say its not...
any ideas?
So i took a look at logs as i usually do, daily, and saw that my firewall was in panic mode (or so it seems)
Looking at the yum update logs i saw the following:
Jul 06 06:50:05 Updated: 7:device-mapper-libs-1.02.107-5.el7_2.5.x86_64
Jul 06 06:50:06 Updated: 7:device-mapper-1.02.107-5.el7_2.5.x86_64
Jul 06 06:50:06 Updated: 7:device-mapper-event-libs-1.02.107-5.el7_2.5.x86_64
Jul 06 06:50:08 Updated: 7:device-mapper-event-1.02.107-5.el7_2.5.x86_64
Jul 06 06:50:08 Updated: 7:lvm2-libs-2.02.130-5.el7_2.5.x86_64
Jul 06 06:50:09 Updated: firewall-1.4.21-6.v7.x86_64
Jul 06 06:50:10 Updated: kernel-tools-libs-3.10.0-327.22.2.v7.x86_64
Jul 06 06:50:11 Updated: kernel-tools-3.10.0-327.22.2.v7.x86_64
Jul 06 06:50:16 Updated: 1:app-base-core-2.2.10-1.v7.noarch
Jul 06 06:50:17 Updated: 1:app-base-2.2.10-1.v7.noarch
Jul 06 06:50:17 Updated: 1:app-firewall-custom-core-2.1.7-1.v7.noarch
Jul 06 06:50:18 Updated: 1:app-marketplace-core-2.1.16-1.v7.noarch
Jul 06 06:50:19 Updated: 1:app-configuration-backup-core-2.2.2-1.v7.noarch
Jul 06 06:50:19 Updated: 1:app-intrusion-prevention-core-2.2.1-1.v7.noarch
Jul 06 06:50:20 Updated: 1:app-samba-common-core-2.2.20-1.v7.noarch
Jul 06 06:50:24 Updated: 1:app-samba-core-2.2.20-1.v7.noarch
Jul 06 06:50:25 Updated: 1:app-firewall-core-2.2.3-1.v7.noarch
Jul 06 06:50:25 Updated: 1:app-firewall-2.2.3-1.v7.noarch
Jul 06 06:50:26 Updated: 1:app-firewall-custom-2.1.7-1.v7.noarch
Jul 06 06:50:26 Updated: 1:app-samba-2.2.20-1.v7.noarch
Jul 06 06:50:27 Updated: 1:app-intrusion-prevention-2.2.1-1.v7.noarch
Jul 06 06:50:27 Updated: 1:app-configuration-backup-2.2.2-1.v7.noarch
Jul 06 06:50:28 Updated: 1:app-marketplace-2.1.16-1.v7.noarch
Jul 06 06:50:30 Updated: 7:lvm2-2.02.130-5.el7_2.5.x86_64
Jul 06 06:50:30 Updated: python-perf-3.10.0-327.22.2.v7.x86_64
Jul 06 06:50:41 Installed: kernel-3.10.0-327.22.2.v7.x86_64
Jul 06 06:50:44 Updated: kernel-headers-3.10.0-327.22.2.v7.x86_64
running systemctl --failed shows the following:
# systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
â firewall.service loaded failed failed ClearOS Firewall Engine
â kdump.service loaded failed failed Crash recovery kernel arming
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
6 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.although, all my iptable rules are up and running, checking the output of firewall debug
firewall: Starting firewall...
firewall: Loading environment
firewall: FW_MODE=gateway
firewall: FW_PROTO=ipv4
firewall: WANIF=eno1
firewall: LANIF=eno2
firewall: SYSWATCH_WANIF=eno1
firewall: WIFIF=
firewall: BANDWIDTH_QOS=on
firewall: QOS_ENGINE=internal
firewall: SQUID_USER_AUTHENTICATION=off
firewall: SQUID_TRANSPARENT=on
firewall: IPSEC_SERVER=off
firewall: PPTP_SERVER=off
firewall: ONE_TO_ONE_NAT_MODE=type2
firewall: FW_DROP=DROP
firewall: FW_ACCEPT=ACCEPT
firewall: IPBIN=/sbin/ip
firewall: TCBIN=/sbin/tc
firewall: MODPROBE=/sbin/modprobe
firewall: RMMOD=/sbin/rmmod
firewall: SYSCTL=/sbin/sysctl
firewall: IFCONFIG=/sbin/ifconfig
firewall: PPTP_PASSTHROUGH_FORCE=no
firewall: EGRESS_FILTERING=off
firewall: PROTOCOL_FILTERING=off
firewall: Detected WAN role for interface: eno1
firewall: Detected LAN role for interface: eno2
firewall: Setting kernel parameters
firewall: /sbin/sysctl -w net.ipv4.neigh.default.gc_thresh1=1024 >/dev/null = 0
firewall: /sbin/sysctl -w net.ipv4.neigh.default.gc_thresh2=4096 >/dev/null = 0
firewall: /sbin/sysctl -w net.ipv4.neigh.default.gc_thresh3=8192 >/dev/null = 0
firewall: /sbin/sysctl -w net.netfilter.nf_conntrack_max=524288 >/dev/null = 0
firewall: /sbin/sysctl -w net.ipv4.ip_forward=1 >/dev/null = 0
firewall: /sbin/sysctl -w net.ipv4.tcp_syncookies=1 >/dev/null = 0
firewall: /sbin/sysctl -w net.ipv4.conf.all.log_martians=0 >/dev/null = 0
firewall: /sbin/sysctl -w net.ipv4.conf.all.accept_redirects=0 >/dev/null = 0
firewall: /sbin/sysctl -w net.ipv4.conf.all.send_redirects=0 >/dev/null = 0
firewall: /sbin/sysctl -w net.ipv4.conf.default.accept_redirects=0 >/dev/null = 0
firewall: /sbin/sysctl -w net.ipv4.conf.default.send_redirects=0 >/dev/null = 0
firewall: /sbin/sysctl -w net.ipv4.conf.all.accept_source_route=0 >/dev/null = 0
firewall: /sbin/sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1 >/dev/null = 0
firewall: /sbin/sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1 >/dev/null = 0
firewall: Detected WAN info - eno1 xx.xx.xxx.xxx on network xx.xx.xxx.0/20
firewall: Detected LAN info - eno2 192.168.4.1 on network 192.168.4.0/24
firewall: Using gateway mode
firewall: Loading kernel modules
firewall: /sbin/modprobe ipt_LOG >/dev/null 2>&1 = 0
firewall: /sbin/modprobe ipt_REJECT >/dev/null 2>&1 = 0
firewall: /sbin/modprobe nf_conntrack_ipv4 >/dev/null 2>&1 = 0
firewall: /sbin/modprobe ipt_IMQ >/dev/null 2>&1 = 0
firewall: /sbin/modprobe ip_conntrack_ftp >/dev/null 2>&1 = 0
firewall: /sbin/modprobe ip_conntrack_irc >/dev/null 2>&1 = 0
firewall: /sbin/modprobe ppp_generic >/dev/null 2>&1 = 0
firewall: /sbin/modprobe ppp_mppe >/dev/null 2>&1 = 0
firewall: /sbin/modprobe ip_conntrack_proto_gre >/dev/null 2>&1 = 256
firewall: /sbin/modprobe ip_conntrack_pptp >/dev/null 2>&1 = 0
firewall: Loading kernel modules for NAT
firewall: /sbin/modprobe ipt_MASQUERADE >/dev/null 2>&1 = 0
firewall: /sbin/modprobe ip_nat_ftp >/dev/null 2>&1 = 0
firewall: /sbin/modprobe ip_nat_irc >/dev/null 2>&1 = 0
firewall: /sbin/modprobe ip_nat_proto_gre >/dev/null 2>&1 = 256
firewall: /sbin/modprobe ip_nat_pptp >/dev/null 2>&1 = 0
firewall: /sbin/modprobe ip_nat_h323 >/dev/null 2>&1 = 0
firewall: /sbin/modprobe ip_nat_tftp >/dev/null 2>&1 = 0
firewall: Setting default policy to DROP
firewall: Defining custom chains
firewall: iptables -t filter -A DROP-lan -j DROP
firewall: Running blocked external rules
firewall: Running custom rules
firewall: Running common rules
firewall: iptables -t filter -A INPUT -m state --state INVALID -j DROP
firewall: iptables -t filter -A INPUT -p tcp --tcp-flags SYN,ACK SYN,ACK -m state --state NEW -j REJECT --reject-with tcp-reset
firewall: iptables -t filter -A INPUT -p tcp ! --syn -m state --state NEW -j DROP
firewall: iptables -t filter -A INPUT -i eno1 -s 127.0.0.0/8 -j DROP
firewall: iptables -t filter -A INPUT -i eno1 -s 169.254.0.0/16 -j DROP
firewall: iptables -t filter -A INPUT -i lo -j ACCEPT
firewall: iptables -t filter -A OUTPUT -o lo -j ACCEPT
firewall: iptables -t filter -A INPUT -i pptp+ -j ACCEPT
firewall: iptables -t filter -A OUTPUT -o pptp+ -j ACCEPT
firewall: iptables -t filter -A INPUT -i tun+ -j ACCEPT
firewall: iptables -t filter -A OUTPUT -o tun+ -j ACCEPT
firewall: iptables -t filter -A INPUT -i eno2 -j ACCEPT
firewall: iptables -t filter -A OUTPUT -o eno2 -j ACCEPT
firewall: iptables -t filter -A INPUT -i eno1 -p icmp --icmp-type 0 -j ACCEPT
firewall: iptables -t filter -A INPUT -i eno1 -p icmp --icmp-type 3 -j ACCEPT
firewall: iptables -t filter -A INPUT -i eno1 -p icmp --icmp-type 8 -j ACCEPT
firewall: iptables -t filter -A INPUT -i eno1 -p icmp --icmp-type 11 -j ACCEPT
firewall: iptables -t filter -A OUTPUT -o eno1 -p icmp -j ACCEPT
firewall: iptables -t filter -A INPUT -i eno1 -p udp --dport bootpc --sport bootps -j ACCEPT
firewall: iptables -t filter -A INPUT -i eno1 -p tcp --dport bootpc --sport bootps -j ACCEPT
firewall: iptables -t filter -A OUTPUT -o eno1 -p udp --sport bootpc --dport bootps -j ACCEPT
firewall: iptables -t filter -A OUTPUT -o eno1 -p tcp --sport bootpc --dport bootps -j ACCEPT
firewall: Running incoming denied rules
firewall: Running user-defined incoming rules
firewall: Allowing incoming udp port/range 1196
firewall: iptables -t filter -A INPUT -p 17 -d xx.xx.xxx.xxx --dport 1196 -j ACCEPT
firewall: iptables -t filter -A OUTPUT -p 17 -o eno1 -s xx.xx.xxx.xxx --sport 1196 -j ACCEPT
firewall: iptables -t nat -A POSTROUTING -o tun+ -j ACCEPT
firewall: Running default incoming allowed rules
firewall: iptables -t filter -A OUTPUT -o eno1 -j ACCEPT
firewall: iptables -t filter -A INPUT -i eno1 -p udp --dport 1024:65535 -m state --state ESTABLISHED,RELATED -j ACCEPT
firewall: iptables -t filter -A INPUT -i eno1 -p tcp --dport 1024:65535 -m state --state ESTABLISHED,RELATED -j ACCEPT
firewall: Running user-defined port forward rules
firewall: Port forwarding tcp 45055:46055 to 192.168.4.152
firewall: iptables -t nat -A PREROUTING -d xx.xx.xxx.xxx -p 6 --dport 45055:46055 -j DNAT --to 192.168.4.152
firewall: iptables -t nat -A POSTROUTING -d 192.168.4.152 -p 6 -s 192.168.4.0/255.255.255.0 --dport 45055:46055 -j SNAT --to 192.168.4.1
firewall: iptables -t filter -A FORWARD -o eno2 -p 6 -d 192.168.4.152 --dport 45055:46055 -j ACCEPT
firewall: Port forwarding tcp 50000:65000 to 192.168.4.120
firewall: iptables -t nat -A PREROUTING -d xx.xx.xxx.xxx -p 6 --dport 50000:65000 -j DNAT --to 192.168.4.120
firewall: iptables -t nat -A POSTROUTING -d 192.168.4.120 -p 6 -s 192.168.4.0/255.255.255.0 --dport 50000:65000 -j SNAT --to 192.168.4.1
firewall: iptables -t filter -A FORWARD -o eno2 -p 6 -d 192.168.4.120 --dport 50000:65000 -j ACCEPT
firewall: /sbin/ip link set imq0 down 2>/dev/null = 0
firewall: /sbin/ip link set imq1 down 2>/dev/null = 0
firewall: /sbin/rmmod imq 2>/dev/null = 0
firewall: /sbin/tc qdisc del dev eno1 root >/dev/null 2>&1 = 512
firewall: Initializing bandwidth manager
firewall: Creating 2 IMQ interface(s)...
firewall: /sbin/modprobe imq numdevs=2 >/dev/null 2>&1 = 0
firewall: iptables -t mangle -A POSTROUTING -o eno1 -j IMQ --todev 0
firewall: Upstream WAN => IMQ interface map:
firewall: 0: eno1 => imq0
firewall: iptables -t mangle -A PREROUTING -i eno1 -j IMQ --todev 1
firewall: Downstream WAN => IMQ interface map:
firewall: 0: eno1 => imq1
firewall: /sbin/ip link set imq0 up 2>/dev/null = 0
firewall: /sbin/tc qdisc del dev imq0 root handle 1: htb >/dev/null 2>&1 = 512
firewall: /sbin/tc qdisc add dev imq0 root handle 1: htb default 2 = 0
firewall: /sbin/ip link set imq1 up 2>/dev/null = 0
firewall: /sbin/tc qdisc del dev imq1 root handle 1: htb >/dev/null 2>&1 = 512
firewall: /sbin/tc qdisc add dev imq1 root handle 1: htb default 2 = 0
firewall: /sbin/tc class add dev imq0 parent 1: classid 1:1 htb rate 20000kbit prio 0 = 0
firewall: /sbin/tc class add dev imq1 parent 1: classid 1:1 htb rate 300000kbit prio 0 = 0
firewall: /sbin/tc class add dev imq0 parent 1:1 classid 1:2 htb rate 2500kbit ceil 20000kbit prio 7 = 0
firewall: /sbin/tc class add dev imq1 parent 1:1 classid 1:2 htb rate 37500kbit ceil 300000kbit prio 7 = 0
firewall: /sbin/tc qdisc add dev imq0 parent 1:2 handle 10: prio = 0
firewall: /sbin/tc qdisc add dev imq1 parent 1:2 handle 10: prio = 0
firewall: /sbin/tc qdisc add dev imq0 parent 10:1 handle 100: pfifo = 0
firewall: /sbin/tc qdisc add dev imq0 parent 10:2 handle 200: sfq perturb 10 = 0
firewall: /sbin/tc qdisc add dev imq0 parent 10:3 handle 300: sfq perturb 10 = 0
firewall: /sbin/tc qdisc add dev imq1 parent 10:1 handle 100: pfifo = 0
firewall: /sbin/tc qdisc add dev imq1 parent 10:2 handle 200: sfq perturb 10 = 0
firewall: /sbin/tc qdisc add dev imq1 parent 10:3 handle 300: sfq perturb 10 = 0
firewall: HTB Class 1:10, priority: 6, rate: 28888kbit, ceil: 56666kbit, interface: imq1
firewall: /sbin/tc class add dev imq1 parent 1:1 classid 1:10 htb rate 28888kbit ceil 56666kbit prio 6 = 0
firewall: HTB Class 1:10, source address: 192.168.4.120, destination address: NONE
firewall: /sbin/tc filter add dev imq1 protocol ip parent 1: pref 1 u32 match ip src 192.168.4.120 flowid 1:10 = 0
firewall: HTB Class 1:10, priority: 6, rate: 2000kbit, ceil: 2500kbit, interface: imq0
firewall: /sbin/tc class add dev imq0 parent 1:1 classid 1:10 htb rate 2000kbit ceil 2500kbit prio 6 = 0
firewall: HTB Class 1:10, source address: 192.168.4.120, destination address: NONE
firewall: /sbin/tc filter add dev imq0 protocol ip parent 1: pref 1 u32 match ip src 192.168.4.120 flowid 1:10 = 0
firewall: HTB Class 1:11, priority: 6, rate: 2000kbit, ceil: 2500kbit, interface: imq0
firewall: /sbin/tc class add dev imq0 parent 1:1 classid 1:11 htb rate 2000kbit ceil 2500kbit prio 6 = 0
firewall: HTB Class 1:11, source address: 192.168.4.120, destination address: NONE
firewall: /sbin/tc filter add dev imq0 protocol ip parent 1: pref 1 u32 match ip src 192.168.4.120 flowid 1:11 = 0
firewall: Running 1-to-1 NAT rules
firewall: Running user-defined proxy rules
firewall: Content filter is online
firewall: Web proxy is online
firewall: iptables -t nat -A PREROUTING -p tcp -d 192.168.4.1 --dport 80 -j ACCEPT
firewall: iptables -t nat -A PREROUTING -p tcp -d 94.22.151.219 --dport 80 -j ACCEPT
firewall: Enabling web proxy bypass for host: 192.168.4.175
firewall: iptables -t nat -A PREROUTING -p tcp -d 192.168.4.175 --dport 80 -j ACCEPT
firewall: iptables -t nat -A PREROUTING -p tcp -s 192.168.4.175 --dport 80 -j ACCEPT
firewall: Enabling web proxy bypass for host: 192.168.4.134
firewall: iptables -t nat -A PREROUTING -p tcp -d 192.168.4.134 --dport 80 -j ACCEPT
firewall: iptables -t nat -A PREROUTING -p tcp -s 192.168.4.134 --dport 80 -j ACCEPT
firewall: Enabled proxy+filter transparent mode for filter port: 8080
firewall: iptables -t nat -A PREROUTING -i eno2 -p tcp --dport 80 -j REDIRECT --to-port 8080
firewall: Blocking proxy port 3128 to force users through content filter
firewall: iptables -t filter -I INPUT -p tcp ! -s 127.0.0.1 --dport 3128 -j DROP
firewall: Running multipath
firewall: /sbin/ip rule | grep -Ev '(local|main|default)' | while read PRIO RULE; do /sbin/ip rule del prio ${PRIO%%:*} 2>/dev/null; done = 0
firewall: /sbin/ip rule | grep -Ev '(local|main|default)' | while read PRIO RULE; do /sbin/ip rule del $RULE prio ${PRIO%%:*} 2>/dev/null; done = 0
firewall: /sbin/ip route flush table 50 = 0
firewall: /sbin/ip route flush cache = 0
firewall: Enabling NAT on WAN interface eno1
firewall: iptables -t nat -A POSTROUTING -o eno1 -j MASQUERADE
firewall: Running user-defined outgoing block rules
firewall: Running default forwarding rules
firewall: iptables -t filter -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
firewall: iptables -t filter -A FORWARD -i eno2 -j ACCEPT
firewall: iptables -t filter -A FORWARD -i pptp+ -j ACCEPT
firewall: iptables -t filter -A FORWARD -i tun+ -j ACCEPT
firewall: Execution time: 0.279s
firewall: Running post-firewall: 20720
firewall: Running /etc/clearos/firewall.d/10-intrusion-prevention
no idea whats up, the firewall seems to be running, but logs say its not...
any ideas?
In Firewall
Share this post:
Responses (7)
-
Accepted Answer
Here is a more in depth log from a reboot i just did.
Jul 8 00:23:30 sekzibox rsyslogd: [origin software="rsyslogd" swVersion="7.4.7" x-pid="741" x-info="http://www.rsyslog.com"] start
Jul 8 00:23:30 sekzibox rsyslogd-2307: warning: ~ action is deprecated, consider using the 'stop' statement instead [try http://www.rsyslog.com/e/2307 ]
Jul 8 00:23:15 sekzibox journal: Runtime journal is using 8.0M (max allowed 195.4M, trying to leave 293.1M free of 1.9G available → current limit 195.4M).
Jul 8 00:23:15 sekzibox kernel: Initializing cgroup subsys cpuset
Jul 8 00:23:15 sekzibox kernel: Initializing cgroup subsys cpu
Jul 8 00:23:15 sekzibox kernel: Initializing cgroup subsys cpuacct
Jul 8 00:23:15 sekzibox kernel: Linux version 3.10.0-327.22.2.v7.x86_64 (mockbuild@build64-1.clearsdn.local) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-4) (GCC) ) #1 SMP Tue Jun 28 13:48:51 MDT 2016
Jul 8 00:23:15 sekzibox kernel: Command line: BOOT_IMAGE=/vmlinuz-3.10.0-327.22.2.v7.x86_64 root=/dev/mapper/clearos-root ro rd.lvm.lv=clearos/root rd.lvm.lv=clearos/swap rhgb quiet LANG=en_US.UTF-8
Jul 8 00:23:15 sekzibox kernel: e820: BIOS-provided physical RAM map:
Jul 8 00:23:15 sekzibox kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
Jul 8 00:23:15 sekzibox kernel: BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
Jul 8 00:23:15 sekzibox kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
Jul 8 00:23:15 sekzibox kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000f1de3fff] usable
Jul 8 00:23:15 sekzibox kernel: BIOS-e820: [mem 0x00000000f1de4000-0x00000000f1dedfff] ACPI data
Jul 8 00:23:15 sekzibox kernel: BIOS-e820: [mem 0x00000000f1dee000-0x00000000f7ffffff] reserved
Jul 8 00:23:15 sekzibox kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
Jul 8 00:23:15 sekzibox kernel: BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
Jul 8 00:23:15 sekzibox kernel: BIOS-e820: [mem 0x0000000100000000-0x000000010bffefff] usable
Jul 8 00:23:15 sekzibox kernel: NX (Execute Disable) protection: active
Jul 8 00:23:15 sekzibox kernel: SMBIOS 2.7 present.
Jul 8 00:23:15 sekzibox kernel: AGP: No AGP bridge found
Jul 8 00:23:15 sekzibox kernel: e820: last_pfn = 0x10bfff max_arch_pfn = 0x400000000
Jul 8 00:23:15 sekzibox kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jul 8 00:23:15 sekzibox kernel: e820: last_pfn = 0xf1de4 max_arch_pfn = 0x400000000
Jul 8 00:23:15 sekzibox kernel: found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80]
Jul 8 00:23:15 sekzibox kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Jul 8 00:23:15 sekzibox kernel: init_memory_mapping: [mem 0x10bc00000-0x10bdfffff]
Jul 8 00:23:15 sekzibox kernel: init_memory_mapping: [mem 0x108000000-0x10bbfffff]
Jul 8 00:23:15 sekzibox kernel: init_memory_mapping: [mem 0x100000000-0x107ffffff]
Jul 8 00:23:15 sekzibox kernel: init_memory_mapping: [mem 0x00100000-0xf1de3fff]
Jul 8 00:23:15 sekzibox kernel: init_memory_mapping: [mem 0x10be00000-0x10bffefff]
Jul 8 00:23:15 sekzibox kernel: RAMDISK: [mem 0x35b57000-0x36da3fff]
Jul 8 00:23:15 sekzibox kernel: ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
Jul 8 00:23:15 sekzibox kernel: ACPI: XSDT 00000000f1de6400 000B4 (v01 HP ProLiant 00000002 Ò? 0000162E)
Jul 8 00:23:15 sekzibox kernel: ACPI: FACP 00000000f1de6540 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E)
Jul 8 00:23:15 sekzibox kernel: ACPI: DSDT 00000000f1de6640 01C1A (v01 HP DSDT 00000001 INTL 20030228)
Jul 8 00:23:15 sekzibox kernel: ACPI: FACS 00000000f1de4140 00040
Jul 8 00:23:15 sekzibox kernel: ACPI: SPCR 00000000f1de4180 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
Jul 8 00:23:15 sekzibox kernel: ACPI: MCFG 00000000f1de4200 0003C (v01 HP ProLiant 00000001 00000000)
Jul 8 00:23:15 sekzibox kernel: ACPI: HPET 00000000f1de4240 00038 (v01 HP ProLiant 00000002 Ò? 0000162E)
Jul 8 00:23:15 sekzibox kernel: ACPI: FFFF 00000000f1de4280 00064 (v02 HP ProLiant 00000002 Ò? 0000162E)
Jul 8 00:23:15 sekzibox kernel: ACPI: SPMI 00000000f1de4300 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
Jul 8 00:23:15 sekzibox kernel: ACPI: ERST 00000000f1de4340 00230 (v01 HP ProLiant 00000001 Ò? 0000162E)
Jul 8 00:23:15 sekzibox kernel: ACPI: APIC 00000000f1de4580 00252 (v01 HP ProLiant 00000002 00000000)
Jul 8 00:23:15 sekzibox kernel: ACPI: FFFF 00000000f1de4800 00176 (v01 HP ProLiant 00000001 Ò? 0000162E)
Jul 8 00:23:15 sekzibox kernel: ACPI: BERT 00000000f1de4980 00030 (v01 HP ProLiant 00000001 Ò? 0000162E)
Jul 8 00:23:15 sekzibox kernel: ACPI: HEST 00000000f1de49c0 000BC (v01 HP ProLiant 00000001 Ò? 0000162E)
Jul 8 00:23:15 sekzibox kernel: ACPI: FFFF 00000000f1de4a80 01914 (v01 HP ProLiant 00000001 Ò? 0000162E)
Jul 8 00:23:15 sekzibox kernel: ACPI: FFFF 00000000f1de63c0 0002D (v01 HP ProLiant 00000001 00000000)
Jul 8 00:23:15 sekzibox kernel: ACPI: SSDT 00000000f1de8280 00137 (v03 HP CRSPCI0 00000002 HP 00000001)
Jul 8 00:23:15 sekzibox kernel: ACPI: SSDT 00000000f1de83c0 00177 (v03 HP riser0 00000002 INTL 20030228)
Jul 8 00:23:15 sekzibox kernel: ACPI: SSDT 00000000f1de8540 001E1 (v01 HP pcc 00000001 INTL 20090625)
Jul 8 00:23:15 sekzibox kernel: ACPI: SSDT 00000000f1de8740 00377 (v01 HP pmab 00000001 INTL 20090625)
Jul 8 00:23:15 sekzibox kernel: ACPI: SSDT 00000000f1de8ac0 00504 (v01 INTEL PPM RCM 80000001 INTL 20061109)
Jul 8 00:23:15 sekzibox kernel: No NUMA configuration found
Jul 8 00:23:15 sekzibox kernel: Faking a node at [mem 0x0000000000000000-0x000000010bffefff]
Jul 8 00:23:15 sekzibox kernel: Initmem setup node 0 [mem 0x00000000-0x10bffefff]
Jul 8 00:23:15 sekzibox kernel: NODE_DATA [mem 0x10bfd8000-0x10bffefff]
Jul 8 00:23:15 sekzibox kernel: Zone ranges:
Jul 8 00:23:15 sekzibox kernel: DMA [mem 0x00001000-0x00ffffff]
Jul 8 00:23:15 sekzibox kernel: DMA32 [mem 0x01000000-0xffffffff]
Jul 8 00:23:15 sekzibox kernel: Normal [mem 0x100000000-0x10bffefff]
Jul 8 00:23:15 sekzibox kernel: Movable zone start for each node
Jul 8 00:23:15 sekzibox kernel: Early memory node ranges
Jul 8 00:23:15 sekzibox kernel: node 0: [mem 0x00001000-0x0009bfff]
Jul 8 00:23:15 sekzibox kernel: node 0: [mem 0x00100000-0xf1de3fff]
Jul 8 00:23:15 sekzibox kernel: node 0: [mem 0x100000000-0x10bffefff]
Jul 8 00:23:15 sekzibox kernel: ACPI: PM-Timer IO Port: 0x908
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
Jul 8 00:23:15 sekzibox kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
Jul 8 00:23:15 sekzibox kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
Jul 8 00:23:15 sekzibox kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
Jul 8 00:23:15 sekzibox kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Jul 8 00:23:15 sekzibox kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jul 8 00:23:15 sekzibox kernel: Using ACPI (MADT) for SMP configuration information
Jul 8 00:23:15 sekzibox kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
Jul 8 00:23:15 sekzibox kernel: smpboot: Allowing 64 CPUs, 62 hotplug CPUs
Jul 8 00:23:15 sekzibox kernel: PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
Jul 8 00:23:15 sekzibox kernel: PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
Jul 8 00:23:15 sekzibox kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
Jul 8 00:23:15 sekzibox kernel: PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
Jul 8 00:23:15 sekzibox kernel: PM: Registered nosave memory: [mem 0xf1de4000-0xf1dedfff]
Jul 8 00:23:15 sekzibox kernel: PM: Registered nosave memory: [mem 0xf1dee000-0xf7ffffff]
Jul 8 00:23:15 sekzibox kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
Jul 8 00:23:15 sekzibox kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfee0ffff]
Jul 8 00:23:15 sekzibox kernel: PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
Jul 8 00:23:15 sekzibox kernel: PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
Jul 8 00:23:15 sekzibox kernel: e820: [mem 0xf8000000-0xfebfffff] available for PCI devices
Jul 8 00:23:15 sekzibox kernel: Booting paravirtualized kernel on bare hardware
Jul 8 00:23:15 sekzibox kernel: setup_percpu: NR_CPUS:5120 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:1
Jul 8 00:23:15 sekzibox kernel: PERCPU: Embedded 31 pages/cpu @ffff88010b400000 s87232 r8192 d31552 u131072
Jul 8 00:23:15 sekzibox kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 1022569
Jul 8 00:23:15 sekzibox kernel: Policy zone: Normal
Jul 8 00:23:15 sekzibox kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-327.22.2.v7.x86_64 root=/dev/mapper/clearos-root ro rd.lvm.lv=clearos/root rd.lvm.lv=clearos/swap rhgb quiet LANG=en_US.UTF-8
Jul 8 00:23:15 sekzibox kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Jul 8 00:23:15 sekzibox kernel: xsave: enabled xstate_bv 0x3, cntxt size 0x240
Jul 8 00:23:15 sekzibox kernel: AGP: Checking aperture...
Jul 8 00:23:15 sekzibox kernel: AGP: No AGP bridge found
Jul 8 00:23:15 sekzibox kernel: Memory: 3982560k/4390908k available (6446k kernel code, 231940k absent, 176408k reserved, 4260k data, 1624k init)
Jul 8 00:23:15 sekzibox kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1
Jul 8 00:23:15 sekzibox kernel: Hierarchical RCU implementation.
Jul 8 00:23:15 sekzibox kernel: #011RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=64.
Jul 8 00:23:15 sekzibox kernel: #011Offload RCU callbacks from all CPUs
Jul 8 00:23:15 sekzibox kernel: #011Offload RCU callbacks from CPUs: 0-63.
Jul 8 00:23:15 sekzibox kernel: NR_IRQS:327936 nr_irqs:936 0
Jul 8 00:23:15 sekzibox kernel: Console: colour VGA+ 80x25
Jul 8 00:23:15 sekzibox kernel: console [tty0] enabled
Jul 8 00:23:15 sekzibox kernel: allocated 17301504 bytes of page_cgroup
Jul 8 00:23:15 sekzibox kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Jul 8 00:23:15 sekzibox kernel: tsc: Fast TSC calibration using PIT
Jul 8 00:23:15 sekzibox kernel: tsc: Detected 2294.564 MHz processor
Jul 8 00:23:15 sekzibox kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.12 BogoMIPS (lpj=2294564)
Jul 8 00:23:15 sekzibox kernel: pid_max: default: 65536 minimum: 512
Jul 8 00:23:15 sekzibox kernel: Security Framework initialized
Jul 8 00:23:15 sekzibox kernel: SELinux: Initializing.
Jul 8 00:23:15 sekzibox kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Jul 8 00:23:15 sekzibox kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Jul 8 00:23:15 sekzibox kernel: Mount-cache hash table entries: 4096
Jul 8 00:23:15 sekzibox kernel: Initializing cgroup subsys memory
Jul 8 00:23:15 sekzibox kernel: Initializing cgroup subsys devices
Jul 8 00:23:15 sekzibox kernel: Initializing cgroup subsys freezer
Jul 8 00:23:15 sekzibox kernel: Initializing cgroup subsys net_cls
Jul 8 00:23:15 sekzibox kernel: Initializing cgroup subsys blkio
Jul 8 00:23:15 sekzibox kernel: Initializing cgroup subsys perf_event
Jul 8 00:23:15 sekzibox kernel: Initializing cgroup subsys hugetlb
Jul 8 00:23:15 sekzibox kernel: CPU: Physical Processor ID: 0
Jul 8 00:23:15 sekzibox kernel: CPU: Processor Core ID: 0
Jul 8 00:23:15 sekzibox kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'#012ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
Jul 8 00:23:15 sekzibox kernel: mce: CPU supports 7 MCE banks
Jul 8 00:23:15 sekzibox kernel: CPU0: Thermal monitoring enabled (TM1)
Jul 8 00:23:15 sekzibox kernel: Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0#012Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32#012tlb_flushall_shift: 2
Jul 8 00:23:15 sekzibox kernel: Freeing SMP alternatives: 28k freed
Jul 8 00:23:15 sekzibox kernel: ACPI: Core revision 20130517
Jul 8 00:23:15 sekzibox kernel: ACPI: All ACPI Tables successfully acquired
Jul 8 00:23:15 sekzibox kernel: ftrace: allocating 24607 entries in 97 pages
Jul 8 00:23:15 sekzibox kernel: Switched APIC routing to physical flat.
Jul 8 00:23:15 sekzibox kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Jul 8 00:23:15 sekzibox kernel: smpboot: CPU0: Intel(R) Celeron(R) CPU G1610T @ 2.30GHz (fam: 06, model: 3a, stepping: 09)
Jul 8 00:23:15 sekzibox kernel: Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Broken BIOS detected, complain to your hardware vendor.
Jul 8 00:23:15 sekzibox kernel: [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Jul 8 00:23:15 sekzibox kernel: Intel PMU driver.
Jul 8 00:23:15 sekzibox kernel: ... version: 3
Jul 8 00:23:15 sekzibox kernel: ... bit width: 48
Jul 8 00:23:15 sekzibox kernel: ... generic registers: 8
Jul 8 00:23:15 sekzibox kernel: ... value mask: 0000ffffffffffff
Jul 8 00:23:15 sekzibox kernel: ... max period: 0000ffffffffffff
Jul 8 00:23:15 sekzibox kernel: ... fixed-purpose events: 3
Jul 8 00:23:15 sekzibox kernel: ... event mask: 00000007000000ff
Jul 8 00:23:15 sekzibox kernel: smpboot: Booting Node 0, Processors #1
Jul 8 00:23:15 sekzibox kernel: Brought up 2 CPUs
Jul 8 00:23:15 sekzibox kernel: smpboot: Total of 2 processors activated (9178.25 BogoMIPS)
Jul 8 00:23:15 sekzibox kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Jul 8 00:23:15 sekzibox kernel: devtmpfs: initialized
Jul 8 00:23:15 sekzibox kernel: EVM: security.selinux
Jul 8 00:23:15 sekzibox kernel: EVM: security.ima
Jul 8 00:23:15 sekzibox kernel: EVM: security.capability
Jul 8 00:23:15 sekzibox kernel: atomic64 test passed for x86-64 platform with CX8 and with SSE
Jul 8 00:23:15 sekzibox kernel: NET: Registered protocol family 16
Jul 8 00:23:15 sekzibox kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Jul 8 00:23:15 sekzibox kernel: ACPI: bus type PCI registered
Jul 8 00:23:15 sekzibox kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Jul 8 00:23:15 sekzibox kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
Jul 8 00:23:15 sekzibox kernel: PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
Jul 8 00:23:15 sekzibox kernel: PCI: Using configuration type 1 for base access
Jul 8 00:23:15 sekzibox kernel: ACPI: Added _OSI(Module Device)
Jul 8 00:23:15 sekzibox kernel: ACPI: Added _OSI(Processor Device)
Jul 8 00:23:15 sekzibox kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Jul 8 00:23:15 sekzibox kernel: ACPI: Added _OSI(Processor Aggregator Device)
Jul 8 00:23:15 sekzibox kernel: ACPI: Interpreter enabled
Jul 8 00:23:15 sekzibox kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
Jul 8 00:23:15 sekzibox kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
Jul 8 00:23:15 sekzibox kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
Jul 8 00:23:15 sekzibox kernel: ACPI: (supports S0 S4 S5)
Jul 8 00:23:15 sekzibox kernel: ACPI: Using IOAPIC for interrupt routing
Jul 8 00:23:15 sekzibox kernel: HEST: Table parsing has been initialized.
Jul 8 00:23:15 sekzibox kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Jul 8 00:23:15 sekzibox kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-14])
Jul 8 00:23:15 sekzibox kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Jul 8 00:23:15 sekzibox kernel: acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability]
Jul 8 00:23:15 sekzibox kernel: acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
Jul 8 00:23:15 sekzibox kernel: acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
Jul 8 00:23:15 sekzibox kernel: acpi PNP0A08:00: _OSC: platform willing to grant []
Jul 8 00:23:15 sekzibox kernel: acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
Jul 8 00:23:15 sekzibox kernel: acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff]; [mem 0xfed00000-0xfed03fff] ignored
Jul 8 00:23:15 sekzibox kernel: PCI host bridge to bus 0000:00
Jul 8 00:23:15 sekzibox kernel: pci_bus 0000:00: root bus resource [bus 00-14]
Jul 8 00:23:15 sekzibox kernel: pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
Jul 8 00:23:15 sekzibox kernel: pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
Jul 8 00:23:15 sekzibox kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
Jul 8 00:23:15 sekzibox kernel: pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
Jul 8 00:23:15 sekzibox kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff]
Jul 8 00:23:15 sekzibox kernel: pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff]
Jul 8 00:23:15 sekzibox kernel: pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
Jul 8 00:23:15 sekzibox kernel: pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
Jul 8 00:23:15 sekzibox kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:01.0: PCI bridge to [bus 07]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:06.0: PCI bridge to [bus 02]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.0: PCI bridge to [bus 0d]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.4: PCI bridge to [bus 03]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.6: PCI bridge to [bus 04]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.7: PCI bridge to [bus 01]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1e.0: PCI bridge to [bus 14] (subtractive decode)
Jul 8 00:23:15 sekzibox kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
Jul 8 00:23:15 sekzibox kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
Jul 8 00:23:15 sekzibox kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 *11)
Jul 8 00:23:15 sekzibox kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
Jul 8 00:23:15 sekzibox kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
Jul 8 00:23:15 sekzibox kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4
Jul 8 00:23:15 sekzibox kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
Jul 8 00:23:15 sekzibox kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
Jul 8 00:23:15 sekzibox kernel: vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none
Jul 8 00:23:15 sekzibox kernel: vgaarb: loaded
Jul 8 00:23:15 sekzibox kernel: vgaarb: bridge control possible 0000:01:00.1
Jul 8 00:23:15 sekzibox kernel: SCSI subsystem initialized
Jul 8 00:23:15 sekzibox kernel: ACPI: bus type USB registered
Jul 8 00:23:15 sekzibox kernel: usbcore: registered new interface driver usbfs
Jul 8 00:23:15 sekzibox kernel: usbcore: registered new interface driver hub
Jul 8 00:23:15 sekzibox kernel: usbcore: registered new device driver usb
Jul 8 00:23:15 sekzibox kernel: PCI: Using ACPI for IRQ routing
Jul 8 00:23:15 sekzibox kernel: NetLabel: Initializing
Jul 8 00:23:15 sekzibox kernel: NetLabel: domain hash size = 128
Jul 8 00:23:15 sekzibox kernel: NetLabel: protocols = UNLABELED CIPSOv4
Jul 8 00:23:15 sekzibox kernel: NetLabel: unlabeled traffic allowed by default
Jul 8 00:23:15 sekzibox kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Jul 8 00:23:15 sekzibox kernel: hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Jul 8 00:23:15 sekzibox kernel: Switching to clocksource hpet
Jul 8 00:23:15 sekzibox kernel: pnp: PnP ACPI init
Jul 8 00:23:15 sekzibox kernel: ACPI: bus type PNP registered
Jul 8 00:23:15 sekzibox kernel: system 00:00: [io 0x0408-0x040f] has been reserved
Jul 8 00:23:15 sekzibox kernel: system 00:00: [io 0x04d0-0x04d1] has been reserved
Jul 8 00:23:15 sekzibox kernel: system 00:00: [io 0x0310-0x0313] has been reserved
Jul 8 00:23:15 sekzibox kernel: system 00:00: [io 0x0316-0x0317] has been reserved
Jul 8 00:23:15 sekzibox kernel: system 00:00: [io 0x0700-0x071f] has been reserved
Jul 8 00:23:15 sekzibox kernel: system 00:00: [io 0x0880-0x08ff] has been reserved
Jul 8 00:23:15 sekzibox kernel: system 00:00: [io 0x0900-0x097f] has been reserved
Jul 8 00:23:15 sekzibox kernel: system 00:00: [io 0x0cd4-0x0cd7] has been reserved
Jul 8 00:23:15 sekzibox kernel: system 00:00: [io 0x0cd0-0x0cd3] has been reserved
Jul 8 00:23:15 sekzibox kernel: system 00:00: [io 0x0f50-0x0f58] has been reserved
Jul 8 00:23:15 sekzibox kernel: system 00:00: [io 0x0ca0-0x0ca1] has been reserved
Jul 8 00:23:15 sekzibox kernel: system 00:00: [io 0x0ca4-0x0ca5] has been reserved
Jul 8 00:23:15 sekzibox kernel: system 00:00: [io 0x02f8-0x02ff] has been reserved
Jul 8 00:23:15 sekzibox kernel: system 00:00: [mem 0xf4000000-0xf7ffffff] has been reserved
Jul 8 00:23:15 sekzibox kernel: system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
Jul 8 00:23:15 sekzibox kernel: pnp: PnP ACPI: found 8 devices
Jul 8 00:23:15 sekzibox kernel: ACPI: bus type PNP unregistered
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8000000-0xf80fffff]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:01.0: PCI bridge to [bus 07]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:06.0: PCI bridge to [bus 02]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.0: PCI bridge to [bus 0d]
Jul 8 00:23:15 sekzibox kernel: pci 0000:03:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
Jul 8 00:23:15 sekzibox kernel: pci 0000:03:00.1: BAR 6: assigned [mem 0xf8020000-0xf803ffff pref]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.4: PCI bridge to [bus 03]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf80fffff]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.4: bridge window [mem 0xfab00000-0xfabfffff 64bit pref]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.6: PCI bridge to [bus 04]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.6: bridge window [mem 0xfbf00000-0xfbffffff]
Jul 8 00:23:15 sekzibox kernel: pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.7: PCI bridge to [bus 01]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.7: bridge window [io 0x3000-0x4fff]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbefffff]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
Jul 8 00:23:15 sekzibox kernel: pci 0000:00:1e.0: PCI bridge to [bus 14]
Jul 8 00:23:15 sekzibox kernel: NET: Registered protocol family 2
Jul 8 00:23:15 sekzibox kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes)
Jul 8 00:23:15 sekzibox kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
Jul 8 00:23:15 sekzibox kernel: TCP: Hash tables configured (established 32768 bind 32768)
Jul 8 00:23:15 sekzibox kernel: TCP: reno registered
Jul 8 00:23:15 sekzibox kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
Jul 8 00:23:15 sekzibox kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
Jul 8 00:23:15 sekzibox kernel: NET: Registered protocol family 1
Jul 8 00:23:15 sekzibox kernel: Unpacking initramfs...
Jul 8 00:23:15 sekzibox kernel: Freeing initrd memory: 18740k freed
Jul 8 00:23:15 sekzibox kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Jul 8 00:23:15 sekzibox kernel: software IO TLB [mem 0xedde4000-0xf1de4000] (64MB) mapped at [ffff8800edde4000-ffff8800f1de3fff]
Jul 8 00:23:15 sekzibox kernel: RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
Jul 8 00:23:15 sekzibox kernel: hw unit of domain pp0-core 2^-16 Joules
Jul 8 00:23:15 sekzibox kernel: hw unit of domain package 2^-16 Joules
Jul 8 00:23:15 sekzibox kernel: hw unit of domain pp1-gpu 2^-16 Joules
Jul 8 00:23:15 sekzibox kernel: microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1c
Jul 8 00:23:15 sekzibox kernel: microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1c
Jul 8 00:23:15 sekzibox kernel: microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Jul 8 00:23:15 sekzibox kernel: sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
Jul 8 00:23:15 sekzibox kernel: sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
Jul 8 00:23:15 sekzibox kernel: futex hash table entries: 16384 (order: 8, 1048576 bytes)
Jul 8 00:23:15 sekzibox kernel: Initialise system trusted keyring
Jul 8 00:23:15 sekzibox kernel: audit: initializing netlink socket (disabled)
Jul 8 00:23:15 sekzibox kernel: type=2000 audit(1467926595.399:1): initialized
Jul 8 00:23:15 sekzibox kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Jul 8 00:23:15 sekzibox kernel: zpool: loaded
Jul 8 00:23:15 sekzibox kernel: zbud: loaded
Jul 8 00:23:15 sekzibox kernel: VFS: Disk quotas dquot_6.5.2
Jul 8 00:23:15 sekzibox kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jul 8 00:23:15 sekzibox kernel: msgmni has been set to 7815
Jul 8 00:23:15 sekzibox kernel: Key type big_key registered
Jul 8 00:23:15 sekzibox kernel: NET: Registered protocol family 38
Jul 8 00:23:15 sekzibox kernel: Key type asymmetric registered
Jul 8 00:23:15 sekzibox kernel: Asymmetric key parser 'x509' registered
Jul 8 00:23:15 sekzibox kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Jul 8 00:23:15 sekzibox kernel: io scheduler noop registered
Jul 8 00:23:15 sekzibox kernel: io scheduler deadline registered (default)
Jul 8 00:23:15 sekzibox kernel: io scheduler cfq registered
Jul 8 00:23:15 sekzibox kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jul 8 00:23:15 sekzibox kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jul 8 00:23:15 sekzibox kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Jul 8 00:23:15 sekzibox kernel: ACPI: Power Button [PWRF]
Jul 8 00:23:15 sekzibox kernel: thermal LNXTHERM:00: registered as thermal_zone0
Jul 8 00:23:15 sekzibox kernel: ACPI: Thermal Zone [THM0] (8 C)
Jul 8 00:23:15 sekzibox kernel: ERST: Error Record Serialization Table (ERST) support is initialized.
Jul 8 00:23:15 sekzibox kernel: pstore: Registered erst as persistent store backend
Jul 8 00:23:15 sekzibox kernel: GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Jul 8 00:23:15 sekzibox kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Jul 8 00:23:15 sekzibox kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jul 8 00:23:15 sekzibox kernel: Non-volatile memory driver v1.3
Jul 8 00:23:15 sekzibox kernel: Linux agpgart interface v0.103
Jul 8 00:23:15 sekzibox kernel: crash memory driver: version 1.1
Jul 8 00:23:15 sekzibox kernel: rdac: device handler registered
Jul 8 00:23:15 sekzibox kernel: hp_sw: device handler registered
Jul 8 00:23:15 sekzibox kernel: emc: device handler registered
Jul 8 00:23:15 sekzibox kernel: alua: device handler registered
Jul 8 00:23:15 sekzibox kernel: libphy: Fixed MDIO Bus: probed
Jul 8 00:23:15 sekzibox kernel: xhci_hcd 0000:04:00.0: xHCI Host Controller
Jul 8 00:23:15 sekzibox kernel: xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
Jul 8 00:23:15 sekzibox kernel: xhci_hcd 0000:04:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000010
Jul 8 00:23:15 sekzibox kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jul 8 00:23:15 sekzibox kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 8 00:23:15 sekzibox kernel: usb usb1: Product: xHCI Host Controller
Jul 8 00:23:15 sekzibox kernel: usb usb1: Manufacturer: Linux 3.10.0-327.22.2.v7.x86_64 xhci-hcd
Jul 8 00:23:15 sekzibox kernel: usb usb1: SerialNumber: 0000:04:00.0
Jul 8 00:23:15 sekzibox kernel: hub 1-0:1.0: USB hub found
Jul 8 00:23:15 sekzibox kernel: hub 1-0:1.0: 2 ports detected
Jul 8 00:23:15 sekzibox kernel: xhci_hcd 0000:04:00.0: xHCI Host Controller
Jul 8 00:23:15 sekzibox kernel: xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
Jul 8 00:23:15 sekzibox kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
Jul 8 00:23:15 sekzibox kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 8 00:23:15 sekzibox kernel: usb usb2: Product: xHCI Host Controller
Jul 8 00:23:15 sekzibox kernel: usb usb2: Manufacturer: Linux 3.10.0-327.22.2.v7.x86_64 xhci-hcd
Jul 8 00:23:15 sekzibox kernel: usb usb2: SerialNumber: 0000:04:00.0
Jul 8 00:23:15 sekzibox kernel: hub 2-0:1.0: USB hub found
Jul 8 00:23:15 sekzibox kernel: hub 2-0:1.0: 2 ports detected
Jul 8 00:23:15 sekzibox kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jul 8 00:23:15 sekzibox kernel: ehci-pci: EHCI PCI platform driver
Jul 8 00:23:15 sekzibox kernel: ehci-pci 0000:00:1a.0: EHCI Host Controller
Jul 8 00:23:15 sekzibox kernel: ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
Jul 8 00:23:15 sekzibox kernel: ehci-pci 0000:00:1a.0: debug port 2
Jul 8 00:23:15 sekzibox kernel: ehci-pci 0000:00:1a.0: irq 21, io mem 0xfacf0000
Jul 8 00:23:15 sekzibox kernel: ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Jul 8 00:23:15 sekzibox kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
Jul 8 00:23:15 sekzibox kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 8 00:23:15 sekzibox kernel: usb usb3: Product: EHCI Host Controller
Jul 8 00:23:15 sekzibox kernel: usb usb3: Manufacturer: Linux 3.10.0-327.22.2.v7.x86_64 ehci_hcd
Jul 8 00:23:15 sekzibox kernel: usb usb3: SerialNumber: 0000:00:1a.0
Jul 8 00:23:15 sekzibox kernel: hub 3-0:1.0: USB hub found
Jul 8 00:23:15 sekzibox kernel: hub 3-0:1.0: 2 ports detected
Jul 8 00:23:15 sekzibox kernel: ehci-pci 0000:00:1d.0: EHCI Host Controller
Jul 8 00:23:15 sekzibox kernel: ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
Jul 8 00:23:15 sekzibox kernel: ehci-pci 0000:00:1d.0: debug port 2
Jul 8 00:23:15 sekzibox kernel: ehci-pci 0000:00:1d.0: irq 20, io mem 0xface0000
Jul 8 00:23:15 sekzibox kernel: ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Jul 8 00:23:15 sekzibox kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
Jul 8 00:23:15 sekzibox kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 8 00:23:15 sekzibox kernel: usb usb4: Product: EHCI Host Controller
Jul 8 00:23:15 sekzibox kernel: usb usb4: Manufacturer: Linux 3.10.0-327.22.2.v7.x86_64 ehci_hcd
Jul 8 00:23:15 sekzibox kernel: usb usb4: SerialNumber: 0000:00:1d.0
Jul 8 00:23:15 sekzibox kernel: hub 4-0:1.0: USB hub found
Jul 8 00:23:15 sekzibox kernel: hub 4-0:1.0: 2 ports detected
Jul 8 00:23:15 sekzibox kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jul 8 00:23:15 sekzibox kernel: ohci-pci: OHCI PCI platform driver
Jul 8 00:23:15 sekzibox kernel: uhci_hcd: USB Universal Host Controller Interface driver
Jul 8 00:23:15 sekzibox kernel: uhci_hcd 0000:01:00.4: UHCI Host Controller
Jul 8 00:23:15 sekzibox kernel: uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 5
Jul 8 00:23:15 sekzibox kernel: uhci_hcd 0000:01:00.4: detected 8 ports
Jul 8 00:23:15 sekzibox kernel: uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
Jul 8 00:23:15 sekzibox kernel: uhci_hcd 0000:01:00.4: irq 16, io base 0x00004000
Jul 8 00:23:15 sekzibox kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Jul 8 00:23:15 sekzibox kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 8 00:23:15 sekzibox kernel: usb usb5: Product: UHCI Host Controller
Jul 8 00:23:15 sekzibox kernel: usb usb5: Manufacturer: Linux 3.10.0-327.22.2.v7.x86_64 uhci_hcd
Jul 8 00:23:15 sekzibox kernel: usb usb5: SerialNumber: 0000:01:00.4
Jul 8 00:23:15 sekzibox kernel: hub 5-0:1.0: USB hub found
Jul 8 00:23:15 sekzibox kernel: hub 5-0:1.0: 2 ports detected
Jul 8 00:23:15 sekzibox kernel: usbcore: registered new interface driver usbserial
Jul 8 00:23:15 sekzibox kernel: usbcore: registered new interface driver usbserial_generic
Jul 8 00:23:15 sekzibox kernel: usbserial: USB Serial support registered for generic
Jul 8 00:23:15 sekzibox kernel: i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
Jul 8 00:23:15 sekzibox kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 8 00:23:15 sekzibox kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jul 8 00:23:15 sekzibox kernel: mousedev: PS/2 mouse device common for all mice
Jul 8 00:23:15 sekzibox kernel: rtc_cmos 00:05: RTC can wake from S4
Jul 8 00:23:15 sekzibox kernel: rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Jul 8 00:23:15 sekzibox kernel: rtc_cmos 00:05: alarms up to one day, 114 bytes nvram, hpet irqs
Jul 8 00:23:15 sekzibox kernel: cpuidle: using governor menu
Jul 8 00:23:15 sekzibox kernel: hidraw: raw HID events driver (C) Jiri Kosina
Jul 8 00:23:15 sekzibox kernel: usbcore: registered new interface driver usbhid
Jul 8 00:23:15 sekzibox kernel: usbhid: USB HID core driver
Jul 8 00:23:15 sekzibox kernel: drop_monitor: Initializing network drop monitor service
Jul 8 00:23:15 sekzibox kernel: TCP: cubic registered
Jul 8 00:23:15 sekzibox kernel: Initializing XFRM netlink socket
Jul 8 00:23:15 sekzibox kernel: NET: Registered protocol family 10
Jul 8 00:23:15 sekzibox kernel: NET: Registered protocol family 17
Jul 8 00:23:15 sekzibox kernel: Loading compiled-in X.509 certificates
Jul 8 00:23:15 sekzibox kernel: Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Jul 8 00:23:15 sekzibox kernel: Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Jul 8 00:23:15 sekzibox kernel: Loaded X.509 cert 'CentOS Linux kernel signing key: 0a250eeee097e23fe89ee6b3bacbedbf7d96cfbb'
Jul 8 00:23:15 sekzibox kernel: registered taskstats version 1
Jul 8 00:23:15 sekzibox kernel: Key type trusted registered
Jul 8 00:23:15 sekzibox kernel: Key type encrypted registered
Jul 8 00:23:15 sekzibox kernel: IMA: No TPM chip found, activating TPM-bypass!
Jul 8 00:23:15 sekzibox kernel: rtc_cmos 00:05: setting system clock to 2016-07-07 21:23:15 UTC (1467926595)
Jul 8 00:23:15 sekzibox kernel: Freeing unused kernel memory: 1624k freed
Jul 8 00:23:15 sekzibox kernel: [Firmware Warn]: ERST: Firmware does not respond in time
Jul 8 00:23:15 sekzibox journal: Journal started
Jul 8 00:23:15 sekzibox systemd-tmpfiles: Failed to parse ACL "d:group:adm:r-x,d:group:wheel:r-x": Invalid argument. Ignoring
Jul 8 00:23:15 sekzibox systemd-tmpfiles: Failed to parse ACL "group:adm:r-x,group:wheel:r-x": Invalid argument. Ignoring
Jul 8 00:23:15 sekzibox systemd-tmpfiles: Failed to parse ACL "d:group:adm:r-x,d:group:wheel:r-x": Invalid argument. Ignoring
Jul 8 00:23:15 sekzibox systemd-tmpfiles: Failed to parse ACL "group:adm:r-x,group:wheel:r-x": Invalid argument. Ignoring
Jul 8 00:23:15 sekzibox kernel: device-mapper: uevent: version 1.0.3
Jul 8 00:23:15 sekzibox kernel: device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
Jul 8 00:23:15 sekzibox systemd-udevd: starting version 219
Jul 8 00:23:15 sekzibox kernel: usb 3-1: new high-speed USB device number 2 using ehci-pci
Jul 8 00:23:15 sekzibox kernel: usb 4-1: new high-speed USB device number 2 using ehci-pci
Jul 8 00:23:15 sekzibox kernel: pps_core: LinuxPPS API ver. 1 registered
Jul 8 00:23:15 sekzibox kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Jul 8 00:23:15 sekzibox kernel: PTP clock support registered
Jul 8 00:23:15 sekzibox kernel: tg3.c:v3.137 (May 11, 2014)
Jul 8 00:23:15 sekzibox kernel: ata_piix 0000:00:1f.2: MAP [
Jul 8 00:23:15 sekzibox kernel: P0 P2 P1 P3 ]
Jul 8 00:23:15 sekzibox kernel: [drm] Initialized drm 1.1.0 20060810
Jul 8 00:23:15 sekzibox kernel: scsi host0: ata_piix
Jul 8 00:23:15 sekzibox kernel: tg3 0000:03:00.0 eth0: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 70:10:6f:3e:9c:60
Jul 8 00:23:15 sekzibox kernel: tg3 0000:03:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
Jul 8 00:23:15 sekzibox kernel: tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
Jul 8 00:23:15 sekzibox kernel: tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
Jul 8 00:23:15 sekzibox kernel: scsi host1: ata_piix
Jul 8 00:23:15 sekzibox kernel: ata1: SATA max UDMA/133 cmd 0x1000 ctl 0x1008 bmdma 0x1020 irq 17
Jul 8 00:23:15 sekzibox kernel: ata2: SATA max UDMA/133 cmd 0x1010 ctl 0x1018 bmdma 0x1028 irq 17
Jul 8 00:23:15 sekzibox kernel: ata_piix 0000:00:1f.5: MAP [
Jul 8 00:23:15 sekzibox kernel: P0 -- P1 -- ]
Jul 8 00:23:15 sekzibox kernel: scsi host2: ata_piix
Jul 8 00:23:15 sekzibox kernel: [TTM] Zone kernel: Available graphics memory: 2001476 kiB
Jul 8 00:23:15 sekzibox kernel: [TTM] Initializing pool allocator
Jul 8 00:23:15 sekzibox kernel: [TTM] Initializing DMA pool allocator
Jul 8 00:23:15 sekzibox kernel: scsi host3: ata_piix
Jul 8 00:23:15 sekzibox kernel: ata3: SATA max UDMA/133 cmd 0x1040 ctl 0x1048 bmdma 0x1060 irq 17
Jul 8 00:23:15 sekzibox kernel: ata4: SATA max UDMA/133 cmd 0x1050 ctl 0x1058 bmdma 0x1068 irq 17
Jul 8 00:23:15 sekzibox kernel: tg3 0000:03:00.1 eth1: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 70:10:6f:3e:9c:61
Jul 8 00:23:15 sekzibox kernel: tg3 0000:03:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
Jul 8 00:23:15 sekzibox kernel: tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
Jul 8 00:23:15 sekzibox kernel: tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
Jul 8 00:23:16 sekzibox kernel: fbcon: mgadrmfb (fb0) is primary device
Jul 8 00:23:16 sekzibox kernel: usb 3-1: New USB device found, idVendor=8087, idProduct=0024
Jul 8 00:23:16 sekzibox kernel: usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul 8 00:23:16 sekzibox kernel: usb 4-1: New USB device found, idVendor=8087, idProduct=0024
Jul 8 00:23:16 sekzibox kernel: usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul 8 00:23:16 sekzibox kernel: hub 4-1:1.0: USB hub found
Jul 8 00:23:16 sekzibox kernel: hub 3-1:1.0: USB hub found
Jul 8 00:23:16 sekzibox kernel: hub 4-1:1.0: 6 ports detected
Jul 8 00:23:16 sekzibox kernel: hub 3-1:1.0: 6 ports detected
Jul 8 00:23:16 sekzibox kernel: Console: switching to colour frame buffer device 128x48
Jul 8 00:23:16 sekzibox kernel: mgag200 0000:01:00.1: fb0: mgadrmfb frame buffer device
Jul 8 00:23:16 sekzibox kernel: mgag200 0000:01:00.1: registered panic notifier
Jul 8 00:23:16 sekzibox kernel: [drm] Initialized mgag200 1.0.0 20110418 for 0000:01:00.1 on minor 0
Jul 8 00:23:16 sekzibox kernel: ata4: SATA link down (SStatus 0 SControl 300)
Jul 8 00:23:16 sekzibox kernel: ata3: SATA link down (SStatus 0 SControl 300)
Jul 8 00:23:16 sekzibox kernel: usb 4-1.3: new high-speed USB device number 3 using ehci-pci
Jul 8 00:23:16 sekzibox kernel: usb 4-1.3: New USB device found, idVendor=0424, idProduct=2660
Jul 8 00:23:16 sekzibox kernel: usb 4-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul 8 00:23:16 sekzibox kernel: hub 4-1.3:1.0: USB hub found
Jul 8 00:23:16 sekzibox kernel: hub 4-1.3:1.0: 2 ports detected
Jul 8 00:23:16 sekzibox kernel: tsc: Refined TSC clocksource calibration: 2294.786 MHz
Jul 8 00:23:16 sekzibox kernel: Switching to clocksource tsc
Jul 8 00:23:16 sekzibox kernel: ata2.00: SATA link down (SStatus 0 SControl 300)
Jul 8 00:23:16 sekzibox kernel: ata2.01: SATA link down (SStatus 0 SControl 300)
Jul 8 00:23:16 sekzibox kernel: ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Jul 8 00:23:16 sekzibox kernel: ata1.01: SATA link down (SStatus 0 SControl 300)
Jul 8 00:23:16 sekzibox kernel: ata1.00: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133
Jul 8 00:23:16 sekzibox kernel: ata1.00: 3907029168 sectors, multi 8: LBA48 NCQ (depth 0/32)
Jul 8 00:23:16 sekzibox kernel: ata1.00: configured for UDMA/133
Jul 8 00:23:16 sekzibox kernel: scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5
Jul 8 00:23:16 sekzibox kernel: sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Jul 8 00:23:16 sekzibox kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks
Jul 8 00:23:16 sekzibox kernel: sd 0:0:0:0: [sda] Write Protect is off
Jul 8 00:23:16 sekzibox kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jul 8 00:23:16 sekzibox kernel: sda: sda1 sda2
Jul 8 00:23:16 sekzibox kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jul 8 00:23:17 sekzibox systemd-fsck: /sbin/fsck.xfs: XFS file system.
Jul 8 00:23:17 sekzibox kernel: SGI XFS with ACLs, security attributes, no debug enabled
Jul 8 00:23:17 sekzibox kernel: XFS (dm-0): Mounting V4 Filesystem
Jul 8 00:23:17 sekzibox kernel: XFS (dm-0): Ending clean mount
Jul 8 00:23:17 sekzibox systemd: Switching root.
Jul 8 00:23:17 sekzibox journal: Journal stopped
Jul 8 00:23:21 sekzibox journal: Runtime journal is using 8.0M (max allowed 195.4M, trying to leave 293.1M free of 1.9G available → current limit 195.4M).
Jul 8 00:23:21 sekzibox journal: Runtime journal is using 8.0M (max allowed 195.4M, trying to leave 293.1M free of 1.9G available → current limit 195.4M).
Jul 8 00:23:21 sekzibox systemd-journald[219]: Received SIGTERM from PID 1 (systemd).
Jul 8 00:23:21 sekzibox kernel: SELinux: Disabled at runtime.
Jul 8 00:23:21 sekzibox kernel: type=1404 audit(1467926598.380:2): selinux=0 auid=4294967295 ses=4294967295
Jul 8 00:23:21 sekzibox kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jul 8 00:23:21 sekzibox systemd[1]: Inserted module 'ip_tables'
Jul 8 00:23:21 sekzibox journal: Journal started
Jul 8 00:23:21 sekzibox systemd: [/etc/systemd/system/dnscrypt.service:10] Unknown lvalue 'PIDfile' in section 'Service'
Jul 8 00:23:21 sekzibox systemd: Configuration file /usr/lib/systemd/system/auditd.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
Jul 8 00:23:21 sekzibox systemd: Cannot add dependency job for unit suva.service, ignoring: Unit suva.service failed to load: No such file or directory.
Jul 8 00:23:21 sekzibox journal: Runtime journal is using 8.0M (max allowed 195.4M, trying to leave 293.1M free of 1.9G available → current limit 195.4M).
Jul 8 00:23:22 sekzibox systemd-udevd: starting version 219
Jul 8 00:23:23 sekzibox lvm: 2 logical volume(s) in volume group "clearos" monitored
Jul 8 00:23:23 sekzibox kernel: ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092f conflicts with OpRegion 0x0000000000000920-0x000000000000092f (\SGPE) (20130517/utaddress-254)
Jul 8 00:23:23 sekzibox kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jul 8 00:23:23 sekzibox kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
Jul 8 00:23:23 sekzibox kernel: EDAC MC: Ver: 3.0.0
Jul 8 00:23:24 sekzibox kernel: power_meter ACPI000D:00: Found ACPI power meter.
Jul 8 00:23:24 sekzibox kernel: power_meter ACPI000D:00: Ignoring unsafe software power cap!
Jul 8 00:23:24 sekzibox kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jul 8 00:23:24 sekzibox kernel: ipmi message handler version 39.2
Jul 8 00:23:24 sekzibox kernel: IPMI System Interface driver.
Jul 8 00:23:24 sekzibox kernel: ipmi_si: probing via ACPI
Jul 8 00:23:24 sekzibox kernel: ipmi_si 00:01: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
Jul 8 00:23:24 sekzibox kernel: ipmi_si: Adding ACPI-specified kcs state machine
Jul 8 00:23:24 sekzibox kernel: ipmi_si: probing via SMBIOS
Jul 8 00:23:24 sekzibox kernel: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
Jul 8 00:23:24 sekzibox kernel: ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
Jul 8 00:23:24 sekzibox kernel: ipmi_si: probing via SPMI
Jul 8 00:23:24 sekzibox kernel: ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
Jul 8 00:23:24 sekzibox kernel: ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
Jul 8 00:23:24 sekzibox kernel: ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
Jul 8 00:23:24 sekzibox kernel: ipmi_si 00:01: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
Jul 8 00:23:24 sekzibox kernel: ipmi_si 00:01: IPMI kcs interface initialized
Jul 8 00:23:24 sekzibox kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jul 8 00:23:24 sekzibox kernel: input: PC Speaker as /devices/platform/pcspkr/input/input1
Jul 8 00:23:24 sekzibox kernel: IPMI SSIF Interface driver
Jul 8 00:23:25 sekzibox kernel: iTCO_vendor_support: vendor-support=0
Jul 8 00:23:25 sekzibox kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
Jul 8 00:23:25 sekzibox kernel: iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
Jul 8 00:23:25 sekzibox kernel: hpwdt 0000:01:00.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 1/ON)
Jul 8 00:23:25 sekzibox kernel: hpwdt 0000:01:00.0: HP Watchdog Timer Driver: 1.3.3, timer margin: 30 seconds (nowayout=0).
Jul 8 00:23:25 sekzibox kernel: alg: No test for crc32 (crc32-pclmul)
Jul 8 00:23:26 sekzibox kernel: intel_rapl: Found RAPL domain package
Jul 8 00:23:26 sekzibox kernel: intel_rapl: Found RAPL domain core
Jul 8 00:23:26 sekzibox kernel: Adding 4063228k swap on /dev/mapper/clearos-swap. Priority:-1 extents:1 across:4063228k FS
Jul 8 00:23:26 sekzibox lvm: 2 logical volume(s) in volume group "clearos" now active
Jul 8 00:23:27 sekzibox kernel: XFS (sda1): Mounting V4 Filesystem
Jul 8 00:23:28 sekzibox kernel: XFS (sda1): Ending clean mount
Jul 8 00:23:29 sekzibox augenrules: /sbin/augenrules: No change
Jul 8 00:23:29 sekzibox augenrules: No rules
Jul 8 00:23:29 sekzibox augenrules: enabled 0
Jul 8 00:23:29 sekzibox augenrules: flag 1
Jul 8 00:23:29 sekzibox augenrules: pid 0
Jul 8 00:23:29 sekzibox augenrules: rate_limit 0
Jul 8 00:23:29 sekzibox augenrules: backlog_limit 320
Jul 8 00:23:29 sekzibox augenrules: lost 0
Jul 8 00:23:29 sekzibox augenrules: backlog 0
Jul 8 00:23:30 sekzibox arpwatch: pcap open eno2: eno2: That device is not up
Jul 8 00:23:30 sekzibox arpwatch: arpwatch: lookup_device: no suitable interface found
Jul 8 00:23:30 sekzibox dnsmasq[721]: started, version 2.72 cachesize 5000
Jul 8 00:23:30 sekzibox dnsmasq[721]: compile time options: IPv6 GNU-getopt DBus no-i18n IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset auth DNSSEC loop-detect
Jul 8 00:23:30 sekzibox dnsmasq[721]: warning: ignoring resolv-file flag because no-resolv is set
Jul 8 00:23:30 sekzibox dnsmasq-dhcp[721]: DHCP, IP range 192.168.4.100 -- 192.168.4.254, lease time 1d
Jul 8 00:23:30 sekzibox dnsmasq[721]: using nameserver 127.0.0.1#2053
Jul 8 00:23:30 sekzibox dnsmasq[721]: read /etc/hosts - 3 addresses
Jul 8 00:23:30 sekzibox dnsmasq-dhcp[721]: read /etc/ethers - 3 addresses
Jul 8 00:23:30 sekzibox saslauthd[750]: detach_tty : master pid is: 750
Jul 8 00:23:30 sekzibox saslauthd[750]: ipc_init : listening on socket: /run/saslauthd/mux
Jul 8 00:23:31 sekzibox acpid: starting up with netlink and the input layer
Jul 8 00:23:31 sekzibox acpid: skipping incomplete file /etc/acpi/events/videoconf
Jul 8 00:23:31 sekzibox acpid: 1 rule loaded
Jul 8 00:23:31 sekzibox acpid: waiting for events: event logging is off
Jul 8 00:23:31 sekzibox nscd: 779 monitoring file `/etc/passwd` (1)
Jul 8 00:23:31 sekzibox nscd: 779 monitoring directory `/etc` (2)
Jul 8 00:23:31 sekzibox nscd: 779 monitoring file `/etc/group` (3)
Jul 8 00:23:31 sekzibox nscd: 779 monitoring directory `/etc` (2)
Jul 8 00:23:31 sekzibox nscd: 779 monitoring file `/etc/hosts` (4)
Jul 8 00:23:31 sekzibox nscd: 779 monitoring directory `/etc` (2)
Jul 8 00:23:31 sekzibox nscd: 779 monitoring file `/etc/resolv.conf` (5)
Jul 8 00:23:31 sekzibox nscd: 779 monitoring directory `/etc` (2)
Jul 8 00:23:31 sekzibox nscd: 779 monitoring file `/etc/services` (6)
Jul 8 00:23:31 sekzibox nscd: 779 monitoring directory `/etc` (2)
Jul 8 00:23:31 sekzibox nscd: 779 monitoring file `/etc/netgroup` (7)
Jul 8 00:23:31 sekzibox nscd: 779 monitoring directory `/etc` (2)
Jul 8 00:23:31 sekzibox dnscrypt-proxy[777]: Starting dnscrypt-proxy 1.6.1
Jul 8 00:23:31 sekzibox dnscrypt-proxy[777]: Generating a new session key pair
Jul 8 00:23:31 sekzibox dnscrypt-proxy[777]: Done
Jul 8 00:23:31 sekzibox svClient[725]: svClient: Error creating socket: bind
Jul 8 00:23:32 sekzibox systemd: arpwatch@eno2.service: control process exited, code=exited status=1
Jul 8 00:23:32 sekzibox systemd: Failed to start Arpwatch ethernet/IP address tracking on eno2.
Jul 8 00:23:32 sekzibox systemd: Unit arpwatch@eno2.service entered failed state.
Jul 8 00:23:32 sekzibox systemd: arpwatch@eno2.service failed.
Jul 8 00:23:32 sekzibox systemd-logind: New seat seat0.
Jul 8 00:23:32 sekzibox systemd-logind: Watching system buttons on /dev/input/event0 (Power Button)
Jul 8 00:23:32 sekzibox openvpn[790]: Options error: In [CMD-LINE]:1: Error opening configuration file: dxct-oneserver.conf
Jul 8 00:23:32 sekzibox openvpn[790]: Use --help for more information.
Jul 8 00:23:32 sekzibox systemd: openvpn@dxct-oneserver.service: control process exited, code=exited status=1
Jul 8 00:23:32 sekzibox systemd: Failed to start OpenVPN Robust And Highly Flexible Tunneling Application On dxct-oneserver.
Jul 8 00:23:32 sekzibox systemd: Unit openvpn@dxct-oneserver.service entered failed state.
Jul 8 00:23:32 sekzibox systemd: openvpn@dxct-oneserver.service failed.
Jul 8 00:23:33 sekzibox openvpn[722]: Options error: In [CMD-LINE]:1: Error opening configuration file: client.conf
Jul 8 00:23:33 sekzibox openvpn[722]: Use --help for more information.
Jul 8 00:23:33 sekzibox systemd: openvpn@client.service: control process exited, code=exited status=1
Jul 8 00:23:33 sekzibox systemd: Failed to start OpenVPN Robust And Highly Flexible Tunneling Application On client.
Jul 8 00:23:33 sekzibox systemd: Unit openvpn@client.service entered failed state.
Jul 8 00:23:33 sekzibox systemd: openvpn@client.service failed.
Jul 8 00:23:33 sekzibox openvpn[748]: OpenVPN 2.3.11 x86_64-redhat-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [PKCS11] [MH] [IPv6] built on May 10 2016
Jul 8 00:23:33 sekzibox openvpn[748]: library versions: OpenSSL 1.0.1e-fips 11 Feb 2013, LZO 2.06
Jul 8 00:23:33 sekzibox openvpn[749]: OpenVPN 2.3.11 x86_64-redhat-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [PKCS11] [MH] [IPv6] built on May 10 2016
Jul 8 00:23:33 sekzibox openvpn[749]: library versions: OpenSSL 1.0.1e-fips 11 Feb 2013, LZO 2.06
Jul 8 00:23:33 sekzibox proftpd: 2016-07-08 00:23:33,508 xxxxxxxx.xxxx.xx.xxx proftpd[765]: processing configuration directory '/etc/proftpd.d'
Jul 8 00:23:34 sekzibox dansguardian[956]: Started sucessfully.
Jul 8 00:23:34 sekzibox clearsyncd[751]: ClearSync initialized.
Jul 8 00:23:34 sekzibox clearsyncd[751]: Network Proxy Watch: Started
Jul 8 00:23:35 sekzibox kernel: tun: Universal TUN/TAP device driver, 1.6
Jul 8 00:23:35 sekzibox kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jul 8 00:23:35 sekzibox openvpn[922]: TUN/TAP device tun0 opened
Jul 8 00:23:35 sekzibox openvpn[922]: do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Jul 8 00:23:35 sekzibox openvpn[922]: /usr/sbin/ip link set dev tun0 up mtu 1500
Jul 8 00:23:35 sekzibox openvpn[923]: TUN/TAP device tun1 opened
Jul 8 00:23:35 sekzibox openvpn[923]: do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Jul 8 00:23:35 sekzibox openvpn[923]: /usr/sbin/ip link set dev tun1 up mtu 1500
Jul 8 00:23:35 sekzibox openvpn[923]: /usr/sbin/ip addr add dev tun1 local 10.8.222.41 peer 10.8.222.40
Jul 8 00:23:35 sekzibox openvpn[922]: /usr/sbin/ip addr add dev tun0 local 10.8.222.50 peer 10.8.222.51
Jul 8 00:23:35 sekzibox openvpn[923]: GID set to nobody
Jul 8 00:23:35 sekzibox openvpn[923]: UID set to nobody
Jul 8 00:23:35 sekzibox openvpn[923]: UDPv4 link local (bound): [undef]
Jul 8 00:23:35 sekzibox openvpn[923]: UDPv4 link remote: [AF_INET]xxx.xxx.xx.xxx:1195
Jul 8 00:23:35 sekzibox openvpn[923]: write UDPv4: Network is unreachable (code=101)
Jul 8 00:23:35 sekzibox openvpn[922]: GID set to nobody
Jul 8 00:23:35 sekzibox openvpn[922]: UID set to nobody
Jul 8 00:23:35 sekzibox openvpn[922]: UDPv4 link local (bound): [undef]
Jul 8 00:23:35 sekzibox openvpn[922]: UDPv4 link remote: [undef]
Jul 8 00:23:35 sekzibox network: Bringing up loopback interface: [ OK ]
Jul 8 00:23:35 sekzibox openvpn[728]: OpenVPN 2.3.11 x86_64-redhat-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [PKCS11] [MH] [IPv6] built on May 10 2016
Jul 8 00:23:35 sekzibox openvpn[794]: OpenVPN 2.3.11 x86_64-redhat-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [PKCS11] [MH] [IPv6] built on May 10 2016
Jul 8 00:23:35 sekzibox openvpn[728]: library versions: OpenSSL 1.0.1e-fips 11 Feb 2013, LZO 2.06
Jul 8 00:23:35 sekzibox openvpn[794]: library versions: OpenSSL 1.0.1e-fips 11 Feb 2013, LZO 2.06
Jul 8 00:23:35 sekzibox openvpn[1087]: PLUGIN_INIT: POST /usr/lib64/openvpn/plugins/openvpn-plugin-auth-pam.so '[/usr/lib64/openvpn/plugins/openvpn-plugin-auth-pam.so] [openvpn]' intercepted=PLUGIN_AUTH_USER_PASS_VERIFY
Jul 8 00:23:35 sekzibox openvpn[1088]: PLUGIN_INIT: POST /usr/lib64/openvpn/plugins/openvpn-plugin-auth-pam.so '[/usr/lib64/openvpn/plugins/openvpn-plugin-auth-pam.so] [openvpn]' intercepted=PLUGIN_AUTH_USER_PASS_VERIFY
Jul 8 00:23:35 sekzibox network: Bringing up interface eno1:
Jul 8 00:23:35 sekzibox kernel: IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
Jul 8 00:23:36 sekzibox openvpn[1088]: Diffie-Hellman initialized with 1024 bit key
Jul 8 00:23:36 sekzibox openvpn[1087]: Diffie-Hellman initialized with 1024 bit key
Jul 8 00:23:36 sekzibox openvpn[1088]: Socket Buffers: R=[229376->229376] S=[229376->229376]
Jul 8 00:23:36 sekzibox openvpn[1087]: Socket Buffers: R=[87380->87380] S=[16384->16384]
Jul 8 00:23:36 sekzibox openvpn[1088]: ROUTE: default_gateway=UNDEF
Jul 8 00:23:36 sekzibox openvpn[1087]: ROUTE: default_gateway=UNDEF
Jul 8 00:23:36 sekzibox openvpn[1088]: TUN/TAP device tun2 opened
Jul 8 00:23:36 sekzibox openvpn[1088]: TUN/TAP TX queue length set to 100
Jul 8 00:23:36 sekzibox openvpn[1087]: TUN/TAP device tun3 opened
Jul 8 00:23:36 sekzibox openvpn[1088]: do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Jul 8 00:23:36 sekzibox openvpn[1087]: TUN/TAP TX queue length set to 100
Jul 8 00:23:36 sekzibox openvpn[1087]: do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Jul 8 00:23:36 sekzibox openvpn[1088]: /usr/sbin/ip link set dev tun2 up mtu 1500
Jul 8 00:23:36 sekzibox openvpn[1087]: /usr/sbin/ip link set dev tun3 up mtu 1500
Jul 8 00:23:36 sekzibox openvpn[1088]: /usr/sbin/ip addr add dev tun2 local 10.8.0.1 peer 10.8.0.2
Jul 8 00:23:36 sekzibox openvpn[1087]: /usr/sbin/ip addr add dev tun3 local 10.8.10.1 peer 10.8.10.2
Jul 8 00:23:36 sekzibox openvpn[1088]: /usr/sbin/ip route add 10.8.0.0/24 via 10.8.0.2
Jul 8 00:23:36 sekzibox openvpn[1087]: /usr/sbin/ip route add 10.8.10.0/24 via 10.8.10.2
Jul 8 00:23:36 sekzibox openvpn[1088]: GID set to nobody
Jul 8 00:23:36 sekzibox openvpn[1088]: UID set to nobody
Jul 8 00:23:36 sekzibox openvpn[1088]: UDPv4 link local (bound): [undef]
Jul 8 00:23:36 sekzibox openvpn[1088]: UDPv4 link remote: [undef]
Jul 8 00:23:36 sekzibox openvpn[1088]: MULTI: multi_init called, r=256 v=256
Jul 8 00:23:36 sekzibox openvpn[1088]: IFCONFIG POOL: base=10.8.0.4 size=62, ipv6=0
Jul 8 00:23:36 sekzibox openvpn[1088]: IFCONFIG POOL LIST
Jul 8 00:23:36 sekzibox openvpn[1088]: Initialization Sequence Completed
Jul 8 00:23:36 sekzibox openvpn[1087]: GID set to nobody
Jul 8 00:23:36 sekzibox openvpn[1087]: UID set to nobody
Jul 8 00:23:36 sekzibox openvpn[1087]: Listening for incoming TCP connection on [undef]
Jul 8 00:23:36 sekzibox openvpn[1087]: TCPv4_SERVER link local (bound): [undef]
Jul 8 00:23:36 sekzibox openvpn[1087]: TCPv4_SERVER link remote: [undef]
Jul 8 00:23:36 sekzibox openvpn[1087]: MULTI: multi_init called, r=256 v=256
Jul 8 00:23:36 sekzibox openvpn[1087]: IFCONFIG POOL: base=10.8.10.4 size=62, ipv6=0
Jul 8 00:23:36 sekzibox openvpn[1087]: IFCONFIG POOL LIST
Jul 8 00:23:36 sekzibox openvpn[1087]: MULTI: TCP INIT maxclients=1024 maxevents=1028
Jul 8 00:23:36 sekzibox openvpn[1087]: Initialization Sequence Completed
Jul 8 00:23:36 sekzibox mysqld_safe: 160708 00:23:36 mysqld_safe Logging to '/var/log/system-mariadb/mariadb.log'.
Jul 8 00:23:36 sekzibox mysqld_safe: 160708 00:23:36 mysqld_safe Starting mysqld daemon with databases from /var/lib/system-mysql
Jul 8 00:23:38 sekzibox systemd-logind: New session 1 of user clearconsole.
Jul 8 00:23:38 sekzibox squid[1448]: Squid Parent: will start 1 kids
Jul 8 00:23:38 sekzibox squid[1448]: Squid Parent: (squid-1) process 1450 started
Jul 8 00:23:39 sekzibox kernel: tg3 0000:03:00.0 eno1: Link is up at 1000 Mbps, full duplex
Jul 8 00:23:39 sekzibox kernel: tg3 0000:03:00.0 eno1: Flow control is on for TX and on for RX
Jul 8 00:23:39 sekzibox kernel: tg3 0000:03:00.0 eno1: EEE is enabled
Jul 8 00:23:39 sekzibox kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
Jul 8 00:23:40 sekzibox systemd: nmb.service: Supervising process 1511 which is not our child. We'll most likely not notice when it exits.
Jul 8 00:23:43 sekzibox dhclient[1498]: DHCPREQUEST on eno1 to 255.255.255.255 port 67 (xid=0x7dcfec1)
Jul 8 00:23:43 sekzibox dhclient[1498]: DHCPACK from xx.xx.xxx.x (xid=0x7dcfec1)
Jul 8 00:23:45 sekzibox proftpd[1600]: 127.0.0.1 - ProFTPD 1.3.5b (maint) (built Fri Mar 11 2016 14:28:58 UTC) standalone mode STARTUP
Jul 8 00:23:45 sekzibox dhclient[1498]: bound to xx.xx.xxx.xxx -- renewal in 2178 seconds.
Jul 8 00:23:45 sekzibox network: Determining IP information for eno1... done.
Jul 8 00:23:46 sekzibox openvpn[923]: Peer Connection Initiated with [AF_INET]xxx.xxx.xx.xxx:1195
Jul 8 00:23:46 sekzibox openvpn[923]: Initialization Sequence Completed
Jul 8 00:23:46 sekzibox network: [ OK ]
Jul 8 00:23:46 sekzibox kernel: IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
Jul 8 00:23:46 sekzibox openvpn[922]: Peer Connection Initiated with [AF_INET]xxx.xx.xx.xx:1196
Jul 8 00:23:46 sekzibox openvpn[922]: Initialization Sequence Completed
Jul 8 00:23:46 sekzibox dnscrypt-proxy[777]: Unable to retrieve server certificates
Jul 8 00:23:47 sekzibox dnscrypt-proxy[777]: Refetching server certificates
Jul 8 00:23:47 sekzibox dnscrypt-proxy[777]: Server certificate #808464433 received
Jul 8 00:23:47 sekzibox dnscrypt-proxy[777]: This certificate is valid
Jul 8 00:23:47 sekzibox dnscrypt-proxy[777]: Chosen certificate #808464433 is valid from [2014-10-16] to [2019-10-15]
Jul 8 00:23:47 sekzibox dnscrypt-proxy[777]: Server key fingerprint is F0AD:8CEB:52C5:8DCD:0244:C28B:550A:BA4F:7BDB:4593:6F19:63DB:72D3:683A:30C0:0612
Jul 8 00:23:47 sekzibox dnscrypt-proxy[777]: Proxying from 127.0.0.1:2053 to 178.216.201.222:2053
Jul 8 00:23:49 sekzibox network: Bringing up interface eno2: [ OK ]
Jul 8 00:23:49 sekzibox prestart.sh: Configuration directory '/etc/openldap/slapd.d' does not exist.
Jul 8 00:23:49 sekzibox prestart.sh: Warning: Usage of a configuration file is obsolete!
Jul 8 00:23:50 sekzibox kernel: tg3 0000:03:00.1 eno2: Link is up at 1000 Mbps, full duplex
Jul 8 00:23:50 sekzibox kernel: tg3 0000:03:00.1 eno2: Flow control is on for TX and on for RX
Jul 8 00:23:50 sekzibox kernel: tg3 0000:03:00.1 eno2: EEE is enabled
Jul 8 00:23:50 sekzibox kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready
Jul 8 00:23:51 sekzibox kdumpctl: No kdump initial ramdisk found.
Jul 8 00:23:51 sekzibox kdumpctl: Rebuilding /boot/initramfs-3.10.0-327.22.2.v7.x86_64kdump.img
Jul 8 00:23:56 sekzibox systemd: winbind.service: Supervising process 3677 which is not our child. We'll most likely not notice when it exits.
Jul 8 00:23:56 sekzibox storage: Starting storage: [ OK ]
Jul 8 00:23:57 sekzibox systemd: smb.service: Supervising process 4078 which is not our child. We'll most likely not notice when it exits.
Jul 8 00:23:58 sekzibox ddclient: Starting ddclient: [ OK ]
Jul 8 00:23:58 sekzibox snortsam: /etc/rc.d/init.d/snortsam: line 15: [: =: unary operator expected
Jul 8 00:23:58 sekzibox dracut: dracut-
Jul 8 00:23:58 sekzibox dracut: Executing: /usr/sbin/dracut --hostonly --hostonly-cmdline --hostonly-i18n -o "plymouth dash resume ifcfg" -f /boot/initramfs-3.10.0-327.22.2.v7.x86_64kdump.img 3.10.0-327.22.2.v7.x86_64
Jul 8 00:23:59 sekzibox snortsam: Starting snortsam: [ OK ]
Jul 8 00:23:59 sekzibox syswatch: /etc/rc.d/init.d/syswatch: line 18: [: =: unary operator expected
Jul 8 00:23:59 sekzibox dropbox: Starting dropbox
Jul 8 00:23:59 sekzibox systemd: Failed to start LSB: start and stop dropbox.
Jul 8 00:23:59 sekzibox systemd: Unit dropbox.service entered failed state.
Jul 8 00:23:59 sekzibox systemd: dropbox.service failed.
Jul 8 00:24:00 sekzibox dracut: dracut module 'modsign' will not be installed, because command 'keyctl' could not be found!
Jul 8 00:24:00 sekzibox dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
Jul 8 00:24:00 sekzibox syswatch: Starting syswatch: [ OK ]
Jul 8 00:24:00 sekzibox dracut: dracut module 'ifcfg' will not be installed, because it's in the list to be omitted!
Jul 8 00:24:00 sekzibox dracut: dracut module 'plymouth' will not be installed, because it's in the list to be omitted!
Jul 8 00:24:01 sekzibox kernel: Bluetooth: Core ver 2.16
Jul 8 00:24:01 sekzibox kernel: NET: Registered protocol family 31
Jul 8 00:24:01 sekzibox kernel: Bluetooth: HCI device and connection manager initialized
Jul 8 00:24:01 sekzibox kernel: Bluetooth: HCI socket layer initialized
Jul 8 00:24:01 sekzibox kernel: Bluetooth: L2CAP socket layer initialized
Jul 8 00:24:01 sekzibox kernel: Bluetooth: SCO socket layer initialized
Jul 8 00:24:01 sekzibox nslcd[4546]: version 0.8.13 starting
Jul 8 00:24:01 sekzibox snortsam: /etc/rc.d/init.d/snortsam: line 15: [: =: unary operator expected
Jul 8 00:24:01 sekzibox auditd[702]: Started dispatcher: /sbin/audispd pid: 4605
Jul 8 00:24:01 sekzibox kernel: type=1305 audit(1467926641.338:3): audit_pid=702 old=0 auid=4294967295 ses=4294967295 res=1
Jul 8 00:24:01 sekzibox audispd: No plugins found, exiting
Jul 8 00:24:01 sekzibox dracut: dracut module 'multipath' will not be installed, because command 'multipath' could not be found!
Jul 8 00:24:01 sekzibox auditd[702]: Init complete, auditd 2.4.1 listening for events (startup state enable)
Jul 8 00:24:01 sekzibox dracut: dracut module 'cifs' will not be installed, because command 'mount.cifs' could not be found!
Jul 8 00:24:01 sekzibox dracut: dracut module 'fcoe' will not be installed, because command 'dcbtool' could not be found!
Jul 8 00:24:01 sekzibox dracut: dracut module 'fcoe' will not be installed, because command 'fipvlan' could not be found!
Jul 8 00:24:01 sekzibox dracut: dracut module 'fcoe' will not be installed, because command 'lldpad' could not be found!
Jul 8 00:24:01 sekzibox dracut: dracut module 'fcoe' will not be installed, because command 'fcoemon' could not be found!
Jul 8 00:24:01 sekzibox dracut: dracut module 'fcoe' will not be installed, because command 'fcoeadm' could not be found!
Jul 8 00:24:01 sekzibox dracut: dracut module 'iscsi' will not be installed, because command 'iscsistart' could not be found!
Jul 8 00:24:01 sekzibox dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
Jul 8 00:24:01 sekzibox dracut: dracut module 'nbd' will not be installed, because command 'nbd-client' could not be found!
Jul 8 00:24:01 sekzibox dracut: 95nfs: Could not find any command of 'rpcbind portmap'!
Jul 8 00:24:01 sekzibox dracut: dracut module 'resume' will not be installed, because it's in the list to be omitted!
Jul 8 00:24:02 sekzibox dracut: dracut module 'modsign' will not be installed, because command 'keyctl' could not be found!
Jul 8 00:24:02 sekzibox dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
Jul 8 00:24:02 sekzibox dracut: dracut module 'multipath' will not be installed, because command 'multipath' could not be found!
Jul 8 00:24:02 sekzibox dracut: dracut module 'cifs' will not be installed, because command 'mount.cifs' could not be found!
Jul 8 00:24:02 sekzibox dracut: dracut module 'fcoe' will not be installed, because command 'dcbtool' could not be found!
Jul 8 00:24:02 sekzibox dracut: dracut module 'fcoe' will not be installed, because command 'fipvlan' could not be found!
Jul 8 00:24:02 sekzibox dracut: dracut module 'fcoe' will not be installed, because command 'lldpad' could not be found!
Jul 8 00:24:02 sekzibox dracut: dracut module 'fcoe' will not be installed, because command 'fcoemon' could not be found!
Jul 8 00:24:02 sekzibox dracut: dracut module 'fcoe' will not be installed, because command 'fcoeadm' could not be found!
Jul 8 00:24:02 sekzibox dracut: dracut module 'iscsi' will not be installed, because command 'iscsistart' could not be found!
Jul 8 00:24:02 sekzibox dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
Jul 8 00:24:02 sekzibox dracut: dracut module 'nbd' will not be installed, because command 'nbd-client' could not be found!
Jul 8 00:24:02 sekzibox dracut: 95nfs: Could not find any command of 'rpcbind portmap'!
Jul 8 00:24:02 sekzibox dracut: *** Including module: bash ***
Jul 8 00:24:02 sekzibox dracut: *** Including module: nss-softokn ***
Jul 8 00:24:02 sekzibox dracut: *** Including module: i18n ***
Jul 8 00:24:03 sekzibox snortsam: Stopping snortsam: [ OK ]
Jul 8 00:24:03 sekzibox snortsam: /etc/rc.d/init.d/snortsam: line 15: [: =: unary operator expected
Jul 8 00:24:03 sekzibox dracut: *** Including module: network ***
Jul 8 00:24:03 sekzibox snortsam: Starting snortsam: [ OK ]
Jul 8 00:24:05 sekzibox dracut: *** Including module: drm ***
Jul 8 00:24:05 sekzibox dracut: *** Including module: dm ***
Jul 8 00:24:06 sekzibox dracut: Skipping udev rule: 64-device-mapper.rules
Jul 8 00:24:06 sekzibox dracut: Skipping udev rule: 60-persistent-storage-dm.rules
Jul 8 00:24:06 sekzibox dracut: Skipping udev rule: 55-dm.rules
Jul 8 00:24:06 sekzibox nslcd[4546]: accepting connections
Jul 8 00:24:06 sekzibox dracut: *** Including module: kernel-modules ***
Jul 8 00:24:06 sekzibox nslcd[4546]: [7b23c6] <passwd="guest"> (re)loading /etc/nsswitch.conf
Jul 8 00:24:06 sekzibox nslcd[4546]: [495cff] <passwd="clearsystem+guest"> request denied by validnames option
Jul 8 00:24:06 sekzibox nslcd[4546]: [e8944a] <passwd="CLEARSYSTEM+guest"> request denied by validnames option
Jul 8 00:24:06 sekzibox nslcd[4546]: [5558ec] <passwd="CLEARSYSTEM+GUEST"> request denied by validnames option
Jul 8 00:24:33 sekzibox systemd-logind: New session 2 of user root.
Jul 8 00:24:37 sekzibox dracut: *** Including module: lvm ***
Jul 8 00:24:37 sekzibox dracut: Skipping udev rule: 64-device-mapper.rules
Jul 8 00:24:37 sekzibox dracut: Skipping udev rule: 56-lvm.rules
Jul 8 00:24:37 sekzibox dracut: Skipping udev rule: 60-persistent-storage-lvm.rules
Jul 8 00:24:38 sekzibox dracut: *** Including module: rootfs-block ***
Jul 8 00:24:38 sekzibox dracut: *** Including module: terminfo ***
Jul 8 00:24:38 sekzibox dracut: *** Including module: udev-rules ***
Jul 8 00:24:39 sekzibox dracut: Skipping udev rule: 91-permissions.rules
Jul 8 00:24:39 sekzibox dracut: *** Including module: biosdevname ***
Jul 8 00:24:39 sekzibox dracut: *** Including module: systemd ***
Jul 8 00:24:40 sekzibox dracut: *** Including module: usrmount ***
Jul 8 00:24:40 sekzibox dracut: *** Including module: base ***
Jul 8 00:24:41 sekzibox dracut: *** Including module: fs-lib ***
Jul 8 00:24:41 sekzibox dracut: *** Including module: kdumpbase ***
Jul 8 00:24:41 sekzibox dracut: *** Including module: shutdown ***
Jul 8 00:24:41 sekzibox dracut: *** Including modules done ***
Jul 8 00:24:41 sekzibox dracut: *** Installing kernel module dependencies and firmware ***
Jul 8 00:24:42 sekzibox dracut: *** Installing kernel module dependencies and firmware done ***
Jul 8 00:24:42 sekzibox dracut: *** Resolving executable dependencies ***
Jul 8 00:24:44 sekzibox dracut: *** Resolving executable dependencies done***
Jul 8 00:24:44 sekzibox dracut: *** Hardlinking files ***
Jul 8 00:24:44 sekzibox dracut: *** Hardlinking files done ***
Jul 8 00:24:44 sekzibox dracut: *** Stripping files ***
Jul 8 00:24:44 sekzibox dracut: *** Stripping files done ***
Jul 8 00:24:44 sekzibox dracut: *** Generating early-microcode cpio image ***
Jul 8 00:24:44 sekzibox dracut: *** Constructing GenuineIntel.bin ****
Jul 8 00:24:44 sekzibox dracut: *** Store current command line parameters ***
Jul 8 00:24:44 sekzibox dracut: *** Creating image file ***
Jul 8 00:24:54 sekzibox journal: Suppressed 1612 messages from /system.slice/snort.service
Jul 8 00:24:54 sekzibox kernel: device eno1 entered promiscuous mode
Jul 8 00:24:57 sekzibox dracut: *** Creating image file done ***
Jul 8 00:25:01 sekzibox kdumpctl: No memory reserved for crash kernel.
Jul 8 00:25:01 sekzibox kdumpctl: Starting kdump: [FAILED]
Jul 8 00:25:01 sekzibox systemd: kdump.service: main process exited, code=exited, status=1/FAILURE
Jul 8 00:25:01 sekzibox systemd: Failed to start Crash recovery kernel arming.
Jul 8 00:25:01 sekzibox systemd: Unit kdump.service entered failed state.
Jul 8 00:25:01 sekzibox systemd: kdump.service failed.
Jul 8 00:27:13 sekzibox clearsyncd[751]: System Events: Socket hang-up: 31
Jul 8 00:27:13 sekzibox clearsyncd[751]: System Events: Socket hang-up: 31
Jul 8 00:27:23 sekzibox systemd-logind: New session 6 of user root.
Jul 8 00:27:35 sekzibox dbus-daemon: dbus[733]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Jul 8 00:27:35 sekzibox dbus[733]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Jul 8 00:27:35 sekzibox polkitd[11391]: Started polkitd version 0.112
Jul 8 00:27:35 sekzibox dbus-daemon: dbus[733]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jul 8 00:27:35 sekzibox dbus[733]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jul 8 00:27:35 sekzibox systemd: Configuration file /usr/lib/systemd/system/ebtables.service is marked executable. Please remove executable permission bits. Proceeding anyway.
Jul 8 00:27:35 sekzibox systemd: Configuration file /usr/lib/systemd/system/ebtables.service is marked executable. Please remove executable permission bits. Proceeding anyway.
Jul 8 00:27:35 sekzibox systemd: Configuration file /usr/lib/systemd/system/ebtables.service is marked executable. Please remove executable permission bits. Proceeding anyway.
Jul 8 00:27:35 sekzibox systemd: Configuration file /usr/lib/systemd/system/ebtables.service is marked executable. Please remove executable permission bits. Proceeding anyway.
Jul 8 00:27:37 sekzibox systemd: Configuration file /usr/lib/systemd/system/ebtables.service is marked executable. Please remove executable permission bits. Proceeding anyway.
Jul 8 00:27:37 sekzibox kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Jul 8 00:27:37 sekzibox kernel: PPP generic driver version 2.4.2
Jul 8 00:27:37 sekzibox kernel: PPP MPPE Compression module registered
Jul 8 00:27:38 sekzibox kernel: IMQ driver loaded successfully. (numdevs = 2, numqueues = 1, imq_dev_accurate_stats = 1)
Jul 8 00:27:38 sekzibox kernel: #011Hooking IMQ after NAT on PREROUTING.
Jul 8 00:27:38 sekzibox kernel: #011Hooking IMQ before NAT on POSTROUTING.
Jul 8 00:27:38 sekzibox kernel: HTB: quantum of class 10001 is big. Consider r2q change.
Jul 8 00:27:38 sekzibox kernel: HTB: quantum of class 10001 is big. Consider r2q change.
Jul 8 00:27:38 sekzibox kernel: HTB: quantum of class 10002 is big. Consider r2q change.
Jul 8 00:27:38 sekzibox kernel: HTB: quantum of class 10010 is big. Consider r2q change.
Jul 8 00:27:38 sekzibox kernel: u32 classifier
Jul 8 00:27:38 sekzibox kernel: Performance counters on
Jul 8 00:27:38 sekzibox kernel: input device check on
Jul 8 00:27:38 sekzibox kernel: Actions configured
Jul 8 00:27:38 sekzibox clearsyncd[751]: System Events: Socket hang-up: 31
Jul 8 00:27:38 sekzibox kernel: Netfilter messages via NETLINK v0.30.
Jul 8 00:27:38 sekzibox kernel: ip_set: protocol 6
Jul 8 00:27:39 sekzibox kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jul 8 00:27:40 sekzibox kernel: IMQ driver unloaded successfully.
Jul 8 00:27:40 sekzibox kernel: IMQ driver loaded successfully. (numdevs = 2, numqueues = 1, imq_dev_accurate_stats = 1)
Jul 8 00:27:40 sekzibox kernel: #011Hooking IMQ after NAT on PREROUTING.
Jul 8 00:27:40 sekzibox kernel: #011Hooking IMQ before NAT on POSTROUTING.
Jul 8 00:27:40 sekzibox kernel: HTB: quantum of class 10001 is big. Consider r2q change.
Jul 8 00:27:40 sekzibox kernel: HTB: quantum of class 10001 is big. Consider r2q change.
Jul 8 00:27:40 sekzibox kernel: HTB: quantum of class 10002 is big. Consider r2q change.
Jul 8 00:27:40 sekzibox systemd: firewall.service: main process exited, code=exited, status=1/FAILURE
Jul 8 00:27:40 sekzibox systemd: Failed to start ClearOS Firewall Engine.
Jul 8 00:27:40 sekzibox systemd: Unit firewall.service entered failed state.
Jul 8 00:27:40 sekzibox systemd: firewall.service failed.
Jul 8 00:27:40 sekzibox clearsyncd[751]: System Events: Socket hang-up: 31
Jul 8 00:28:17 sekzibox systemd-logind: Removed session 6.
Jul 8 00:28:31 sekzibox systemd-logind: New session 7 of user root.
[root@sekzibox ~]# systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
â arpwatch@eno2.service loaded failed failed Arpwatch ethernet/IP address tracking on eno2
â firewall.service loaded failed failed ClearOS Firewall Engine
â openvpn@client.service loaded failed failed OpenVPN Robust And Highly Flexible Tunneling Application On client
â openvpn@dxct-oneserver.service loaded failed failed OpenVPN Robust And Highly Flexible Tunneling Application On dxct-oneserver
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
4 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
[root@sekzibox ~]#
-
Accepted Answer
-
Accepted Answer
I was thinking the same
I've fixed the kdump issue manually by making changes to /etc/defualt/grub
adding the following crashkernel=256M entry.GRUB_CMDLINE_LINUX="rd.lvm.lv=clearos/root rd.lvm.lv=clearos/swap crashkernel=256M rhgb quiet"
[root@sekzibox ~]# grub2-mkconfig -o /boot/grub2/grub.cfg
[root@sekzibox ~]# shutdown -r now
although rebooting the system still starts the firewall in a panic state with all default accept policies in place (no routing for squid/dansguardian for internet access)
i have to start the firewall
even though it fails, the normal system and custom firewall rules load (iptables) and have internet access once again.service firewall start
as long as there is no power cuts or reboots needed, i don't have to manually load anything :P
Hope this gets resolved soon, have not seen many people report this as yet..
i mean, i have 4 systems running 7.x (final) and they all have the issue. -
Accepted Answer
-
Accepted Answer
-
Accepted Answer
no idea whats up, the firewall seems to be running, but logs say its not...
any ideas?
It's the ipv6 script that is failing and logging the 'panic firewall' status.
/usr/sbin/firewall-start -d
OK
/usr/sbin/firewall-start6 -d
WIll likely fail.
We're getting someone to look at it on Monday.
B. -
Accepted Answer
Hi,
Same problem here. This morning I had a power failure. After work this afternoon, powered up my gateway, no connection to Internet.
The firewall failed to start.
My kernel is those updated on 6 july: 3.10.0-327.22.2.v7.x86_64
When I start manually the firewall it never finish loading, I've to "break it" via CTRL+C, but if I do a iptables -nvL, it is working.
If I: systemctl status firewall it says that it has failed.
So please continue to investigate.
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »