Community Forum

Resolved
0 votes
I installed in my server (ClearOS 6.3) an usb 3.0 pci-express card but it's not working, and I don't no how to update/upload drivers for it. Is it possible to add this PCI-E card to my system? Kernel version 2.6.32-279.22.1.v6.x86_64.
Tuesday, February 19 2013, 08:23 PM
Share this post:
Responses (6)
  • Accepted Answer

    Sunday, March 03 2013, 08:26 PM - #Permalink
    Resolved
    0 votes
    Disabling the Legacy USB option in my bios resolved the situation.
    Thanks for Your help!
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, February 24 2013, 03:22 PM - #Permalink
    Resolved
    0 votes
    I'm not sure how much more I'm going to be able to help you here. Can you do a:
    lspci -n | grep 02:00
    This will give you the Vendor ID and Device ID which should help with research.

    From what I've seen on the internet you may need the xhci_hcd module (or perhaps the xhci module). ClearOS comes with one but I can't see which devices it is compatible with, and I don't know how to track down a later one other than updating the kernel, which is not much of an option. The best you can do here is a "yum update" then reboot to the latest kernel (although yum update may be playing up at the moment so you may need to do just a "yum update kernel*")

    I've seen some posts on the internet with problems with the chip. Some of the motherboard ones say to disable the Legacy USB option. Does your card have an extra BIOS? This should show up briefly during the boot up sequence and possibly tell you what key to press to get into it.

    One thing I have not worked out in 6.x yet is how to load a module when another one is being used in its place without blacklisting it and I'd be nervous of blacklisting the ahci module as it is used all over the place.
    The reply is currently minimized Show
  • Accepted Answer

    Saturday, February 23 2013, 10:28 PM - #Permalink
    Resolved
    0 votes
    I got this long list, with two SATA controler 02:00.0 SATA controller: ASMedia Technology Inc. and 03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller. The first is my last PCI card added - its a multiport usb 3.0 + eSATA, and as I see the usb 3.0 driver is not loaded (on the second controller are loded both the SATA and IDE drivers 03:00.0 and 03:00.1). Is it possible to load usb 3.0 drivers or I need a new simple usb 3.0 PCI-e card (not multiport)?

    [root@clearos ~]# lspci -v
    00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
    Subsystem: Hewlett-Packard Company Device 1609
    Flags: bus master, 66MHz, medium devsel, latency 0
    Capabilities: [c4] HyperTransport: Slave or Primary Interface
    Capabilities: [54] HyperTransport: UnitID Clumping
    Capabilities: [40] HyperTransport: Retry Mode
    Capabilities: [9c] HyperTransport: #1a
    Capabilities: [f8] HyperTransport: #1c

    00:01.0 PCI bridge: Hewlett-Packard Company Device 9602 (prog-if 00 [Normal decode])
    Flags: bus master, 66MHz, medium devsel, latency 64
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
    I/O behind bridge: 0000a000-0000afff
    Memory behind bridge: fe500000-fe6fffff
    Prefetchable memory behind bridge: 00000000fc000000-00000000fdffffff
    Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
    Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 1609
    Kernel modules: shpchp

    00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 0000b000-0000cfff
    Memory behind bridge: fe700000-fe7fffff
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Root Port (Slot+), MSI 00
    Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 1609
    Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
    Capabilities: [100] Vendor Specific Information <?>
    Capabilities: [110] Virtual Channel <?>
    Kernel driver in use: pcieport
    Kernel modules: shpchp

    00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 0000d000-0000efff
    Memory behind bridge: fe800000-fe8fffff
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Root Port (Slot+), MSI 00
    Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 1609
    Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
    Capabilities: [100] Vendor Specific Information <?>
    Capabilities: [110] Virtual Channel <?>
    Kernel driver in use: pcieport
    Kernel modules: shpchp

    00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    Memory behind bridge: fe900000-fe9fffff
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Root Port (Slot-), MSI 00
    Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 1609
    Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
    Capabilities: [100] Vendor Specific Information <?>
    Capabilities: [110] Virtual Channel <?>
    Kernel driver in use: pcieport
    Kernel modules: shpchp

    00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0])
    Subsystem: Hewlett-Packard Company Device 1609
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 27
    I/O ports at 9000 [size=8]
    I/O ports at 8000 [size=4]
    I/O ports at 7000 [size=8]
    I/O ports at 6000 [size=4]
    I/O ports at 5000 [size=16]
    Memory at fe4ffc00 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+
    Capabilities: [70] SATA HBA <?>
    Capabilities: [a4] PCI Advanced Features
    Kernel driver in use: ahci
    Kernel modules: ahci

    00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
    Subsystem: Hewlett-Packard Company Device 1609
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
    Memory at fe4fe000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd

    00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
    Subsystem: Hewlett-Packard Company Device 1609
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
    Memory at fe4ff800 (32-bit, non-prefetchable) [size=256]
    Capabilities: [c0] Power Management version 2
    Capabilities: [e4] Debug port: BAR=1 offset=00e0
    Kernel driver in use: ehci_hcd

    00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
    Subsystem: Hewlett-Packard Company Device 1609
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
    Memory at fe4fd000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd

    00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
    Subsystem: Hewlett-Packard Company Device 1609
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
    Memory at fe4ff400 (32-bit, non-prefetchable) [size=256]
    Capabilities: [c0] Power Management version 2
    Capabilities: [e4] Debug port: BAR=1 offset=00e0
    Kernel driver in use: ehci_hcd

    00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 41)
    Flags: 66MHz, medium devsel
    Kernel driver in use: piix4_smbus
    Kernel modules: i2c-piix4

    00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
    Subsystem: Hewlett-Packard Company Device 1609
    Flags: bus master, 66MHz, medium devsel, latency 0

    00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
    Flags: bus master, 66MHz, medium devsel, latency 64
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=64

    00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
    Subsystem: Hewlett-Packard Company Device 1609
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
    Memory at fe4fc000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd

    00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
    Subsystem: Hewlett-Packard Company Device 1609
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
    Memory at fe4ff000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [c0] Power Management version 2
    Capabilities: [e4] Debug port: BAR=1 offset=00e0
    Kernel driver in use: ehci_hcd

    00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
    Flags: fast devsel
    Capabilities: [80] HyperTransport: Host or Secondary Interface

    00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
    Flags: fast devsel

    00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
    Flags: fast devsel
    Kernel modules: amd64_edac_mod

    00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
    Flags: fast devsel
    Capabilities: [f0] Secure device <?>
    Kernel driver in use: k10temp
    Kernel modules: k10temp

    00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
    Flags: fast devsel

    01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS880M [Mobility Radeon HD 4200 Series] (prog-if 00 [VGA controller])
    Subsystem: Hewlett-Packard Company Device 1609
    Flags: bus master, fast devsel, latency 0, IRQ 18
    Memory at fc000000 (32-bit, prefetchable) [size=32M]
    I/O ports at a000 [size=256]
    Memory at fe6f0000 (32-bit, non-prefetchable) [size=64K]
    Memory at fe500000 (32-bit, non-prefetchable) [size=1M]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [50] Power Management version 3
    Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
    Kernel driver in use: radeon
    Kernel modules: radeon

    02:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) (prog-if 01 [AHCI 1.0])
    Subsystem: ASMedia Technology Inc. Device 1060
    Flags: bus master, fast devsel, latency 0, IRQ 28
    I/O ports at c800 [size=8]
    I/O ports at c400 [size=4]
    I/O ports at c000 [size=8]
    I/O ports at b800 [size=4]
    I/O ports at b400 [size=32]
    Memory at fe7ffc00 (32-bit, non-prefetchable) [size=512]
    Expansion ROM at fe7e0000 [disabled] [size=64K]
    Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [78] Power Management version 3
    Capabilities: [80] Express Legacy Endpoint, MSI 00
    Capabilities: [100] Virtual Channel <?>
    Kernel driver in use: ahci
    Kernel modules: ahci

    03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) (prog-if 01 [AHCI 1.0])
    Subsystem: JMicron Technology Corp. JMB363 SATA/IDE Controller
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Memory at fe8fe000 (32-bit, non-prefetchable) [size=8K]
    Expansion ROM at fe8e0000 [disabled] [size=64K]
    Capabilities: [68] Power Management version 2
    Capabilities: [50] Express Legacy Endpoint, MSI 01
    Kernel driver in use: ahci
    Kernel modules: ahci

    03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) (prog-if 85 [Master SecO PriO])
    Subsystem: JMicron Technology Corp. JMB363 SATA/IDE Controller
    Flags: bus master, fast devsel, latency 0, IRQ 17
    I/O ports at e800 [size=8]
    I/O ports at e400 [size=4]
    I/O ports at e000 [size=8]
    I/O ports at d800 [size=4]
    I/O ports at d400 [size=16]
    Capabilities: [68] Power Management version 2
    Kernel driver in use: pata_jmicron
    Kernel modules: ata_generic, pata_acpi, pata_jmicron

    04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5723 Gigabit Ethernet PCIe (rev 10)
    Subsystem: Hewlett-Packard Company NC107i Integrated PCI Express Gigabit Server Adapter
    Flags: bus master, fast devsel, latency 0, IRQ 29
    Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: [48] Power Management version 3
    Capabilities: [40] Vital Product Data
    Capabilities: [60] Vendor Specific Information <?>
    Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [cc] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [13c] Virtual Channel <?>
    Capabilities: [160] Device Serial Number 78-e7-d1-ff-fe-b1-34-df
    Capabilities: [16c] Power Budgeting <?>
    Kernel driver in use: tg3
    Kernel modules: tg3
    The reply is currently minimized Show
  • Accepted Answer

    Friday, February 22 2013, 06:07 PM - #Permalink
    Resolved
    0 votes
    OK, I badly misread your first post. You'll have to do an "lspci -v" and post the output. At the moment I've no idea what I'm looking for in the output so you'll have to post it all. Do you have any more information on the make or model of the card?
    The reply is currently minimized Show
  • Accepted Answer

    Friday, February 22 2013, 05:45 PM - #Permalink
    Resolved
    0 votes
    I have a HP proliant microserver with seven usb 2.0 ports
    I added a Delock pci-e 2xmultiport usb 3.0 + esatap card

    [root@clearos ~]# lsusb
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 002: ID 04f3:01a4 Elan Microelectronics Corp. Wireless Keyboard
    The reply is currently minimized Show
  • Accepted Answer

    Tuesday, February 19 2013, 08:29 PM - #Permalink
    Resolved
    0 votes
    What is the output of "lsusb"?
    The reply is currently minimized Show
Your Reply