Forums

An0nimen
An0nimen
Offline
Resolved
0 votes
[62783730.771373] After installation of a new version of microcode_ctl package,
[62783730.771388] initramfs hasn't been re-generated for all the installed kernel packages.
[62783730.771397] The following kernel packages have been skipped: kernel-3.10.0-1062.12.1.el7.x86_64 kernel-3.10.0-1062.9.1.el7.x86_64.
[62783730.771405] Please re-generate initramfs manually for these kernel packages with the
[62783730.771413] "dracut -f --kver KERNEL_VERSION" command in order to get the latest
[62783730.771432] Intel CPU microcode included into early initramfs image for it, if needed.
Sunday, October 10 2021, 05:11 PM
Share this post:

Accepted Answer

Sunday, October 10 2021, 06:17 PM - #Permalink
Resolved
0 votes
You don't update your system very often! And you are still one kernel behind. Current is kernel-3.10.0-1160.42.2.el7.x86_64. When you next boot, it should boot off kernel-3.10.0-1160.41.1.el7.x86_64 so that should be OK. The issue is if you try selecting one of the 1062 kernels but these should be your third and fourth choice for booting.

You could try what it suggests:
dracut -f kernel-3.10.0-1062.9.1.el7
dracut -f kernel-3.10.0-1062.12.1.el7
But I have never tried it. On the other hand, if you aren't worried about having the latest microcode package in those kernels, then don't bother. I probably wouldn't bother.
The reply is currently minimized Show
Responses (3)
  • Accepted Answer

    An0nimen
    An0nimen
    Offline
    Sunday, October 10 2021, 06:41 PM - #Permalink
    Resolved
    0 votes
    For some reason i thought it was auto updating so i ren command to update just in case and it updated 200 packages GG. But yes i am only interested in running the latest kernel on reboot so will not change anything. TY for your help and have a good day!
    The reply is currently minimized Show
  • Accepted Answer

    An0nimen
    An0nimen
    Offline
    Sunday, October 10 2021, 05:55 PM - #Permalink
    Resolved
    0 votes
    [root@one ~]# rpm -qa | grep kernel-3
    kernel-3.10.0-1160.25.1.el7.x86_64
    kernel-3.10.0-957.21.3.v7.x86_64
    kernel-3.10.0-1062.9.1.el7.x86_64
    kernel-3.10.0-1062.12.1.el7.x86_64
    kernel-3.10.0-1160.41.1.el7.x86_64
    [root@one ~]#
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, October 10 2021, 05:20 PM - #Permalink
    Resolved
    0 votes
    What is the output of:
    rpm -qa | grep kernel-3
    The reply is currently minimized Show
Your Reply