Community Forum

Jason Lim
Jason Lim
Offline
Resolved
0 votes
I have v7.4 installed on a dedicated machine with raid 1. All went well and I am able to access webgui. I restarted via webgui and the machine refuse to restart and get this error message
dracut warning: killing all remaining processes
What can I do?
Thursday, December 07 2017, 07:38 AM
Share this post:
Responses (5)
  • Accepted Answer

    Jason Lim
    Jason Lim
    Offline
    Saturday, December 09 2017, 12:32 PM - #Permalink
    Resolved
    0 votes
    Ok I know what I did wrong. I setup hardware raid1 via bios instead of using software RAID. Later I removed the hardware raid and used clearos to setup software raid. Works fine now.
    The reply is currently minimized Show
  • Accepted Answer

    Jason Lim
    Jason Lim
    Offline
    Thursday, December 07 2017, 09:46 PM - #Permalink
    Resolved
    0 votes
    Nick Howitt wrote:Are you able to select a different kernel when booting or does it not get that far?

    Hi Nick, I can do a hard reboot and try to select a different kernel. Will do that and report back.
    The reply is currently minimized Show
  • Accepted Answer

    Thursday, December 07 2017, 08:57 PM - #Permalink
    Resolved
    0 votes
    Are you able to select a different kernel when booting or does it not get that far?
    The reply is currently minimized Show
  • Accepted Answer

    Jason Lim
    Jason Lim
    Offline
    Thursday, December 07 2017, 07:28 PM - #Permalink
    Resolved
    0 votes
    Thanks Courtney, the problem is the screen attached to the clearos server is stuck at the error message and there isn't a prompt for me to enter commands.The only thing to do is to hard reboot.
    The reply is currently minimized Show
  • Accepted Answer

    Thursday, December 07 2017, 02:33 PM - #Permalink
    Resolved
    0 votes
    Have you tried the following commands?

    service webconfig restart


    service webconfig stop
    then
    service webconfig start


    If those don't work, try:

    reboot
    The reply is currently minimized Show
Your Reply