Forums

Resolved
0 votes
After first boot and configuring the network settings via the web interface on the console the web interface gives a error after login. I made a bug report on Gitlab. I'm not sure if I reported the issue under the right app. Please move if necessary. This issue was not on ClearOS 7.5.

See Gitlab
Sunday, May 19 2019, 01:03 PM
Share this post:
Responses (16)
  • Accepted Answer

    Monday, May 20 2019, 05:25 PM - #Permalink
    Resolved
    0 votes
    @Nick, I tried what you suggested, but it changed nothing. I still have the same situation.
    The reply is currently minimized Show
  • Accepted Answer

    Monday, May 20 2019, 09:35 AM - #Permalink
    Resolved
    0 votes
    Yes, I will have try this evening.
    The reply is currently minimized Show
  • Accepted Answer

    Monday, May 20 2019, 08:06 AM - #Permalink
    Resolved
    0 votes
    Out of curiosity, can you try changing the line in /etc/sudoers from:
    webconfig ALL=NOPASSWD: CC

    to
    webconfig ALL=NOPASSWD: ALL
    Change it back after testing.
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, May 19 2019, 04:42 PM - #Permalink
    Resolved
    0 votes
    Nick Howitt wrote:

    @Dave, I can't remember, but is this the issue we were looking at on my oldserver before the upgrade and then we saw a slightly different aspect in a VM where we could do something like Backspace or alt+backspace to get out of it? If so, it went away for me on the oldserver when I reinstalled so I assume I created damage when playing around with it in the past, but perhaps it is a bit more of an issue. Sudoers?


    To be clear it's a fresh install! So I did not tinker with this system.
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, May 19 2019, 04:39 PM - #Permalink
    Resolved
    0 votes
    Dave Loper wrote:

    I always recommend Crtl+Alt+Fn because it always works (in my experience) whether you are going from text tty to other text tty or from XWindows to text tty.


    Using the "fn" key it probably means your behind a MacBook. When you access the console over IPMI you need the "fn" key? I'm not sure..

    The stop screen you are seeing is from the default graphical console called 'gconsole'. It is a lite xWiindows environment with a scaled down Firefox app. There are lots of reasons why it can 'bork' itself based on a number of upstream changes. The usefulness is quite limited to first-boot and recovery scenarios.


    Yes, I only use it with first boot but it's very useful.
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, May 19 2019, 04:09 PM - #Permalink
    Resolved
    0 votes
    @Dave, I can't remember, but is this the issue we were looking at on my oldserver before the upgrade and then we saw a slightly different aspect in a VM where we could do something like Backspace or alt+backspace to get out of it? If so, it went away for me on the oldserver when I reinstalled so I assume I created damage when playing around with it in the past, but perhaps it is a bit more of an issue. Sudoers?
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, May 19 2019, 03:31 PM - #Permalink
    Resolved
    0 votes
    I always recommend Crtl+Alt+Fn because it always works (in my experience) whether you are going from text tty to other text tty or from XWindows to text tty.

    The stop screen you are seeing is from the default graphical console called 'gconsole'. It is a lite xWiindows environment with a scaled down Firefox app. There are lots of reasons why it can 'bork' itself based on a number of upstream changes. The usefulness is quite limited to first-boot and recovery scenarios.

    One way around any issues here is to install the full UI and use full firefox. Please note that you cannot have two xWindows running at a time (typically) so you will need to fully exit the one you are having trouble with.
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, May 19 2019, 03:02 PM - #Permalink
    Resolved
    0 votes
    Okay, no "fn" key needed to activate the function keys?
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, May 19 2019, 02:57 PM - #Permalink
    Resolved
    0 votes
    Marcel van van Leeuwen wrote:

    You can do access different screens with the alt-shift-function key. So if you do alt-shift-f2 you go to the text console.

    I know, but somehow it was not working.
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, May 19 2019, 02:53 PM - #Permalink
    Resolved
    0 votes
    Patrick de Brabander wrote:

    A week ago i had the same problem. (after the 7.6 update)

    I tried to access the "Graphical-mode Console" through my iLO and got the same error.
    After that i had difficulties to leave the menu. Since it is running on firefox i could do a kind of hard exit to return to normal screen


    You can do access different screens with the alt-shift-function key. So if you do alt-shift-f2 you go to the text console.
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, May 19 2019, 02:41 PM - #Permalink
    Resolved
    0 votes
    A week ago i had the same problem. (after the 7.6 update)

    I tried to access the "Graphical-mode Console" through my iLO and got the same error.
    After that i had difficulties to leave the menu. Since it is running on firefox i could do a kind of hard exit to return to normal screen
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, May 19 2019, 02:34 PM - #Permalink
    Resolved
    0 votes
    Having some trouble to post the picture..
    Attachments:
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, May 19 2019, 02:33 PM - #Permalink
    Resolved
    0 votes
    Having some trouble to post the picture..
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, May 19 2019, 02:29 PM - #Permalink
    Resolved
    0 votes
    Okay went to basement to check. I still can't access the webui. See the attached picture.

    "An error was encountered. The action you have requested is not allowed"

    This is right after login. This is fresh install of the ClearOS 7.6 iso.
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, May 19 2019, 01:49 PM - #Permalink
    Resolved
    0 votes
    I can't remember what the error was at that time I had no phone with me to take a picture. I'm going to the basement to check if it does still the same. I haven't tried for the second time. I configured the server from a client when the console was falling.

    It's all in the console where you can setup your network after first boot.
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, May 19 2019, 01:35 PM - #Permalink
    Resolved
    0 votes
    Hi Marcel,
    Can you be more specific about the error you are seeing? Also, is this all at the console that you are doing and seeing this?
    The reply is currently minimized Show
Your Reply