My Community Dashboard

  • oh, ok

    2. with -A 2 it shows nothing about the gateway

    this is what it show with "ip route", I dont know if there is another command for the routing table.

    [root@gateway ~]# ip route
    10.8.10.2 dev tun1 proto kernel scope link src 10.8.10.1
    10.8.0.2 dev tun0 proto kernel scope link src 10.8.0.1
    192.168.20.0/24 dev eth1 proto kernel scope link src 192.168.20.201
    10.8.0.0/24 via 10.8.0.2 dev tun0
    192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.1
    10.8.10.0/24 via 10.8.10.2 dev tun1
    192.168.10.0/24 dev eth2 proto kernel scope link src 192.168.10.2
    default via 192.168.20.1 dev eth1


    5.

    [root@gateway ~]# lspci -k | grep Eth -A 3
    01:00.0 Ethernet controller: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet (rev c0)
    Subsystem: ASUSTeK Computer Inc. Device 847e
    Kernel driver in use: atl1c
    Kernel modules: atl1c
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
    Subsystem: TP-LINK Technologies Co., Ltd. TG-3468 Gigabit PCI Express Network Adapter
    Kernel driver in use: r8169
    Kernel modules: r8169
    03:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller (rev 10)
    Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC
    Kernel driver in use: r8169
    Kernel modules: r8169