Using the Untangle Directory Connector with ClearOS
This guide provides some tips on how to use the ClearOS RADIUS/LDAP system with Untangle.
ClearOS RADIUS Configuration
Before you can connect Untangle to ClearOS RADIUS/LDAP, you need to create a client configuration entry. In other words, you need to grant access to RADIUS for the Untangle system. Please refer to the RADIUS User Guide about installation and more information.
To configure the RADIUS client configuration in ClearOS:
Go to Network|Infrastructure|RADIUS Server in the menu
Click on in the Clients summary
The IP address of the Untangle system
A nickname of your choosing (e.g. Untangle)
A password for the Untangle access
That's all there is to it.
Untangle Directory Connector Configuration
To configure the Untangle Directory Connector:
Click on on the Directory Connector rack
Click on the RADIUS Connector tab
The IP address of the ClearOS system
The port number: 1812 (default)
The password specified above
The authentication method: PAP
Go ahead and click on to make sure the connection succeeds. If all goes well, specify a ClearOS username/password in the Untangle configuration and re-test. If all goes well, save the settings to complete the configuration.
content/en_us/kb_o_using_the_untangle_directory_connector_with_clearos.txt · Last modified: 2016/07/20 09:10 by dloper